K11 Spares (1994)

[TONEY]

I Have All Parts Inculding Gear Box That Only Done 40000 + Vw Wide Arches. Smothed Bumpers All Are Going Very Cheap

ThankS
Toney

 

[59 bhp is more than enough]

what kind of wheels do yo have, any pics

 

[Andy_S]

any pics of the arches?? am interested. Also after the heater resistor card too if it aint bust like everyones is lmao (bloody nissan) haha

 

[steve.moody]

I Have All Parts Inculding Gear Box That Only Done 40000 + Vw Wide Arches. Smothed Bumpers All Are Going Very Cheap

ThankS
Toney

Do you have msn?, because i'm after a couple of specific things

Cheers

Steve

 

[richmicratwista]

any pics of bumpers mate. im interested in rear 1

 

[goldstar0011]

VW Arches, will have for right price

get me on msn or email
[email protected]

 

[chie]

if anyone has seen my k11 they will know the golf arches look sweet, well worth doin imo, but would look better with wide rims too

 

[benmicrasr]

Any pics and where u from?

 

[R05_Micra]

ide ave ya front bumper like!

 

[Andy_S]

if anyone has seen my k11 they will know the golf arches look sweet, well worth doin imo, but would look better with wide rims too

any pics then??

am interested in the arches mate

 

[TONEY]

hi people
i am in the croydon area
my msn is [email protected]
i will put photos up soon as it stops raining and sorry but the wheels have allready gone

thanks toney

 

[richmicratwista]

still interested in rear bumper pic and price

 

[TONEY]

still interested in rear bumper pic and price

the rear bumper has slight dammage (were the filler has fallen out due to an old woman going in to me) on the drivers side
it also has number plate light on the other side
you can have it for £10

toney

 

[Stuart]

chie, how did you attach the wide arches?

 

[richmicratwista]

send me a pic mate

 

[chie]

i used self tappers to the inside edge and made little clips to clip to the inner wing, pretty easy really, i didnt bother smoothing mine to the body as i got them to fit quite good,

 

[TONEY]

arches have gone
soz about the pics cant seam to load on to comp, hopefully sould have it sorted soon

 

[MicraModz]

can i have a picture of the rear bumper?

Thanks

 

[TONEY]

PICS ARE ON http://www.cardomain.com/ride/2206654 ENJOY

TONEY

 

[Speedle]

hi mate

im after the wheel hubs with claipers can you pm me with a price?

thanks
Mat

 

[richmicratwista]

the bumper is urs micra modz!!!

 

[TONEY]

speedle

cant pm cos not member
u can have them for £35 or i can meet u at pease pottage services for 40 it up 2 u
do u want the drive shafts and disks

 

[steve.moody]

did you get my most recent email toney ?

 

[TONEY]

did you get my most recent email toney ?

no it says that it could not connect sever just try and send it again mate

toney

 

[steve.moody]

no it says that it could not connect sever just try and send it again mate

toney

Toney
Have tried to re-send the message, if you don't get it, heres the jist of it

The price you said for the two sets + bulbs is fine

Iv'e remembered that I also wanted a clip from the engine bay -

Hard to explain but its near to where the bonnet prop attaches to the car body.

This is a picture of the broken clip - http://img.photobucket.com/albums/v495/stevenmoody/k11bits/P1010002.jpg and http://img.photobucket.com/albums/v495/stevenmoody/k11bits/P1010005.jpg

A picture of a non-broken one of these clips is - http://img.photobucket.com/albums/v495/stevenmoody/k11bits/P1010007.jpg

I only need the one, to replace my broken one.

If you've got one could you give us an email with the price for the clip + the original price you quoted with your name and address and who to make the cheque payable to so i can get it sent of to you.

Cheers
Steve

 

[Craig]

Hi, do you still have the bit of trim that goes between the front windows and the doors on the inside?
Cheers Craig

 

[Speedle]

speedle

cant pm cos not member
u can have them for £35 or i can meet u at pease pottage services for 40 it up 2 u
do u want the drive shafts and disks

pease pottage for £40 notes is grand mate i need the hubs calipers and disc's if you please i dont need the drive shafts

my email is [email protected] seing us a mail and we can arrange collecting

 

[TONEY]

Hi, do you still have the bit of trim that goes between the front windows and the doors on the inside?
Cheers Craig

do u mean the arch trim i have them but they holes were the wheels used 2 rub

thanks toney

 

[Craig]

Nah, the bit inside the car above the doorcards.
Craig

 

[steve.moody]

Nah, the bit inside the car above the doorcards.
Craig

Do you mean the inner window rubber seal ?

 

[rosey]

Hi,

Do you have the heater motor resistor card ???

And did it work on all 4 settings ??

Rosey

 

[m1ck97]

Do you have the bulb for the backlight for the digital clock in the dash?

Rosey: If he doesnt have the part, have a look on ebay for the titles "Micra broken - Spares here" Or something along them lines. My resistor card was knackered too, so i just sent a couple of them a email, mines in the post at the moment. Cost me a tenner.

 

[TONEY]

Hi,

Do you have the heater motor resistor card ???

And did it work on all 4 settings ??

Rosey

yes i do and it works

 

[TONEY]

Do you have the bulb for the backlight for the digital clock in the dash?

Rosey: If he doesnt have the part, have a look on ebay for the titles "Micra broken - Spares here" Or something along them lines. My resistor card was knackered too, so i just sent a couple of them a email, mines in the post at the moment. Cost me a tenner.

are these ones the same as the other ones in the dash
cos i dont think that my one worked but if they are the same u can have them

thanks toney

 

[TONEY]

Hi, do you still have the bit of trim that goes between the front windows and the doors on the inside?
Cheers Craig

yer i do have it but can u take a pic of what part so i dont get confused

thanks toney

 

[Andy_S]

yes i do and it works

how much you wanting for it?

 

[TONEY]

how much you wanting for it?

£10 and there will be no postage fees due size

the car is geting striped tommorow

 

[m1ck97]

Do you have the bulb for the backlight for the digital clock in the dash?

Rosey: If he doesnt have the part, have a look on ebay for the titles "Micra broken - Spares here" Or something along them lines. My resistor card was knackered too, so i just sent a couple of them a email, mines in the post at the moment. Cost me a tenner.

I have no idea, im waiting for my haynes manual to come. Hopefully it'll tell me. If it looks the same i'll take it.

 

[rosey]

yes i do and it works

How much for the card, and to post to cumbria ??

Ta

Rosey