FS - NS & OS Headlights(k11)

[mackem_micra]

basiacally what it says - just the glass and casing no wiring or out like i dont think - will have to see - just wondered if there was any interest in these also??!

 

[R05_Micra]

I WANT!!!!!!!!! need the set for me car lol, the screws ok at the back mate?

 

[mackem_micra]

richie mate do you just want the car - haha!!!
erm as for screw i aint sure mate which screws?!if no-one else is interested i'll bring them through with the splitter if you want at the weekend - unless you need them for the mot?!

 

[R05_Micra]

lol, need em for mot, the 2 bolts at the back, if there ok, ill get them on fri, on way to test centre, how much u want? and have ya got msn? save postin all the time lol

 

[mackem_micra]

aint got msn at work mate it will have to be on here - will have a look at the bolts 2nite n let you know either in txt or on here 2mora, is that ok - if needs b i'll drop them off 4ya one night before fri coz like i sed i work til 5 - even if it means leving them at yours then sort payment out later?!

 

[rlees85]

facelift or prefacelift?

 

[mackem_micra]

k11 m-reg pre facelift? it aint got the vents in the bonnet they in the grill which is seperate

 

[R05_Micra]

aint got msn at work mate it will have to be on here - will have a look at the bolts 2nite n let you know either in txt or on here 2mora, is that ok - if needs b i'll drop them off 4ya one night before fri coz like i sed i work til 5 - even if it means leving them at yours then sort payment out later?!

no bother mate, well what you want for em? n ill give the money to me dad n he will pay ya.

 

[mackem_micra]

say 15 a light does that sound reasonable?!do you want me to drop the splitter off with the lights?! so say leave 40 with your dad then that will be that settled?!
obviously if the lights are any gud - wot if they aint got the screws or if they no gud?!

 

[R05_Micra]

nope there no good if the screw snaps, if you heat up the screw with a plumbers flame torch, n spray in WD-40 they should come out ok,

 

[mackem_micra]

sorry rich then they aint got the screws - well they have got one with them - i never got round to swaping them on the car i just got them as spares 2 change sorry mate

 

[goldstar0011]

best you get some pics if you can.

are all the screw/bolt holders ok?

 

[mackem_micra]

all the holders etc are ok but there is only one screw with them - will try n get picks n try n up load them if i can!!

 

[goldstar0011]

If the mounts are fine people can use existing bolts, I got new bolts and used epoxy to glue them into the holder as the square ended bolts tend to destroy the plastic.

 

[mackem_micra]

pretty sure these are stil up for grabs if people want or need them - aint got screws with them but all the holders for the screws are fine

any takers?