pollyp's latest activity

2025-09-01 Check Brake Wear Discs are wearing smooth & evenly All the pads wearing evenly, front inner pad has a slight lip Front...

The "switched 12v feed" for the headunit, which has to run through the IGN switch & immobiliser & extra crimps, seems to get only 13.67v...

2025-08-31 Test Sony Headunit RMS Voltages Since the last time I tested the Sony headunits speaker output in June 2020, I've improved...

2025-08-31 Replace Fuel Hose I was watching this video about E10 and poor quality modern cheap fuel hoses degrading/cracking, reminding...

Printed some blue clips the next day to contrast the red engine bay Might as well include the rainbow too lol 😅

2025-08-29 Print HT Lead Clips These HT lead supports I printed 10yrs ago are starting to warp & crack from all the heat & clamping...

2025-08-29 Inspect Worn Denso K16TT Spark Plugs These Denso K16TT I fitted in 2021 are getting old now. You can see in the following...

That's true 🫣 Thanks m8 (y)

Quote: “cheapo small & large batteries & charger as a set on ebay yrs ago” I automatically associate cheap tools, equipment &...

2025-08-25 PWM Fan Controller Extension Wiring To make a longer & neater loom for the PWM controller, I grabbed a spare blower fan from...

I brought the cheapo small & large batteries & charger as a set on ebay yrs ago. Could it be the charger or battery controller slightly...

With the pushrod shortened by 5mm, I bled the brakes again, started the car with wheels lifted, pump the brake pedal few times...

Managed to find an M6 screw of the correct length Pushrod sits at the right spot where the CAD model says Machined a deeper...

2025-08-16 Fix Citroen C3 Master Cylinder Long Travel Issue For the longest time ever since I fitted a larger Citreon C3 M/C in 2015 to...

The other day I was only briefly using this old battery grinder for just 10sec and whilst looking away finishing a task, I suddenly...