pollyp's latest activity

2025-08-10 Convert Heater Blower Resistor Card into PWM controller Recently noticed the battery is again not fully charging up towards...

2025-07-04 Shorten Bonnet Hook The bonnet seems to sit slightly too far up and the latch is already at it's lowest position, so the...

Personal Update 2025-08-17 It's been a difficult 2025 for me with no signs of hope 😞 Left a terribly uncomfortable & brief job in...

2025-06-26 Inspect Fuel Tank for Debris So I swapped to a clean facelift tank since March 2024 Changed to a stainless filler pipe in...

Attached brakes & aligned the wheels Printed this cover to protect the exposed adjustable trailing arms from rust Going for a...

2025-06-24 Install New Rear Axle Had to trim the inside lip off these spring cusions so that the spring doesn't jam on the spring seat...

Axle overhauled & ready to reinstall :cool: 👌

Wirebrushed & cleaned the light surface rust off all the parts Applied the initial layer of Jomastic epoxy primer followed by a...

2025-06-21 Make Rose Jointed Panhard Rod Welded the nuts onto the new steel pipe Attached the rose joints Machined this tapered...

2025-06-21 Weld New Panhard Rod Mount I was waiting on this ebay M16 bolt for the panhard mount but realised it's coming from china &...

2025-06-19 Wirebrush Rear Axle Managed to pry the RH spring off & snapped the rest of the panhard mount off 🙈 Wirebrushed as much...