eBay find

Status
Not open for further replies.
Don't like that it doesn't look even close to being balanced
I maybe wrong
Won't be putting it near my Micra probably knacker the crank it'll be throwing out so much
 
gtsnissanb said:
Don't like that it doesn't look even close to being balanced
I maybe wrong
Won't be putting it near my Micra probably knacker the crank it'll be throwing out so much
Click to expand...

you are wrong its perfectly balanced, why does it not look ballanced?

it will not knacker your crank, i ran that very flywheel for well over 18 months.

(im not selling it btw, i sold it months age, got far less than £60 too)
 
Oh and if it was mine, it would be advertised for a k11 and is be asking for alot more than £60
 
Well, whoever is selling it has sold some seats before, from gloucester and bought an Almera air box, Almera filter, Corsa B coilovers, Rear Splitter, Wind deflectors, JDM rear lights, Omp strut brace, then some K10 stuff and then some white witch pagan/wiccan shizzle :p
according to the feedback.
:p
 
Fair enough I own half that shizzle, the only almera stuff I own at the moment is my ga15 throttle body and injectors, the only seats I've ever sold went to a friend of mine who then sold them on (for a profit c***) and I don't have a splitter
 
Well someone around your area with similar initials KRJ also has a similar micra and had a K10 :p
 
superls said:
you are wrong its perfectly balanced, why does it not look ballanced?

it will not knacker your crank, i ran that very flywheel for well over 18 months.

(im not selling it btw, i sold it months age, got far less than £60 too)
Click to expand...

Because the holes drilled are very speradically drilled, I've had a few lightened flys and they have never looked that random
If it is even slightly unbalanced which it looked like to me although that does not mean it is unbalanced by any means! But if it were, this would cause the fly wheel to throw out like a wheel would at 60mph, but a flywheel isn't attached to a nice sturdy hub it's attached to a ####y crank which isn't particularly strong anyway and also a flywheel spins 1000s of times faster than a road wheel! And that horrible wobble you get when a wheel is a few gram off is the same punishment the crank takes when a fly is wrong, this cause the crank to move and possibly bend resulting in one dead engine
If the correct paper work showing the fly was spot on could be shown to me I'd have no issues at all, but someone saying it was fitted to mine for a while and didn't break anything doesn't prove it's ok it just hadn't had enough time to rip the crank from it's cradle yet
 
gtsnissanb said:
Because the holes drilled are very speradically drilled, I've had a few lightened flys and they have never looked that random
If it is even slightly unbalanced which it looked like to me although that does not mean it is unbalanced by any means! But if it were, this would cause the fly wheel to throw out like a wheel would at 60mph, but a flywheel isn't attached to a nice sturdy hub it's attached to a ####y crank which isn't particularly strong anyway and also a flywheel spins 1000s of times faster than a road wheel! And that horrible wobble you get when a wheel is a few gram off is the same punishment the crank takes when a fly is wrong, this cause the crank to move and possibly bend resulting in one dead engine
If the correct paper work showing the fly was spot on could be shown to me I'd have no issues at all, but someone saying it was fitted to mine for a while and didn't break anything doesn't prove it's ok it just hadn't had enough time to rip the crank from it's cradle yet
Click to expand...

the holes are NOT random, i know why and so does it say in the thread i posted when i made the flywheel, im not stupid i know what can/would happen if something is out of ballance, i was just stating that that fly will not damage your crank as it is not out of ballance.

i dont have to explain myself to you, i know its sound, but if 18months of almost 1500 miles per month is not a long enough period to 'rip the crank from its cradle' then i doubt it would to be honest.

a point you have made im unclear on, 'a flywheel spins 1000s of times faster than a road wheel!' my engine revs to 7700rpm ish (so call it 8k as thats what i hit in my k10 a couple of times) so you say if a road wheel spins 1000's of times slower than that, so thats like slower than 8rpm you wouldnt be going too far to fastly. lol
 
superls said:
the holes are NOT random, i know why and so does it say in the thread i posted when i made the flywheel, im not stupid i know what can/would happen if something is out of ballance, i was just stating that that fly will not damage your crank as it is not out of ballance.

i dont have to explain myself to you, i know its sound, but if 18months of almost 1500 miles per month is not a long enough period to 'rip the crank from its cradle' then i doubt it would to be honest.

a point you have made im unclear on, 'a flywheel spins 1000s of times faster than a road wheel!' my engine revs to 7700rpm ish (so call it 8k as thats what i hit in my k10 a couple of times) so you say if a road wheel spins 1000's of times slower than that, so thats like slower than 8rpm you wouldnt be going too far to fastly. lol
Click to expand...

What is your attitude problem? Have you got physical evidence that It was perfectly balanced?
I never said you didn't know, didn't ask you to explain yourself so what if it didn't break your crank! It doesn't mean if someone had it on for longer than you then it wouldn't break does it, your 'i had it on mine' proclaimation is worth nothing without proof that it was done on a balancer and not done by you in a shed with a drill! It's not a poke at your skills or background as I don't know you, but that's my point I don't know who made it so how do I know it's good
Also you hit 8000rpm I said a road wheel spins 1000s of times slower I didn't say it was an exact mathematical equation but the fact is a flywheel will spin alot faster than a road wheel
What's with the attack prove the balancing was done and I'll happily appologise and stfu
 
Status
Not open for further replies.

Similar threads

L
k12 items on ebay
Replies
1
Views
597
leroyboi22
L
TriNode
Pair of K11 electric mirrors (unused)
Replies
0
Views
834
TriNode
TriNode
joesouthgate
  • Locked
[SOLD] Dezent Motion 15" Black Alloys with Red Lip on eBay
Replies
11
Views
2K
joesouthgate
joesouthgate
MICRASKYLINE
Some games and womens Asics trainers for sale! (My ebay!)
Replies
0
Views
653
MICRASKYLINE
MICRASKYLINE
legendryan
Will this Quick Shift fit a K11?
Replies
14
Views
3K
hotroder
H
Back
Top