Latest activity

What's new New posts New media New media comments New profile posts Latest activity
  • WaterSugarYeast
    WaterSugarYeast reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-08-10 Convert Heater Blower Resistor Card into PWM controller Recently noticed the battery is again not fully charging up towards...
  • WaterSugarYeast
    WaterSugarYeast reacted to pollyp's post in the thread PollyMobiles Rebuild with Sad Sad.
    Personal Update 2025-08-17 It's been a difficult 2025 for me with no signs of hope 😞 Left a terribly uncomfortable & brief job in...
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    These Denso K16TT are just regular cheap nickel coated electrodes with a thinner double-pertruding tip design (smaller area might've...
  • M
    Micra Paul replied to the thread PollyMobiles Rebuild.
    Marketing b/s implied platinum & iridium type long life plugs (Denso K16TT spark plugs) were for inaccessible engine bay applications &...
  • M
    Micra Paul reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-08-29 Inspect Worn Denso K16TT Spark Plugs These Denso K16TT I fitted in 2021 are getting old now. You can see in the following...
  • 1275
    1275 reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    Ah I should've checked with the nissan4u OEM charts first which shows the factory spark plugs are indeed NGK BKR4E-11 / BKR5E-11 /...
  • 1275
    1275 reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-02 Replace Bosch FR7 DCX Spark Plugs With the old Denso K16TT worn out, it's time to replace them. Previously I would've used...
  • 1275
    1275 reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-02 Test Headunit Max Volume vs Frequency To test how the equaliser setting & input voltage affects the max vol level just...
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    Ah I should've checked with the nissan4u OEM charts first which shows the factory spark plugs are indeed NGK BKR4E-11 / BKR5E-11 /...
    • oem.jpg
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    2025-09-02 Replace Bosch FR7 DCX Spark Plugs With the old Denso K16TT worn out, it's time to replace them. Previously I would've used...
    • IMG_20250902_124524.jpg
    • IMG_20250902_123553.jpg
    • IMG_20250902_123430.jpg
    • IMG_20250902_122813.jpg
    • IMG_20250902_122807.jpg
    • IMG_20250902_122802.jpg
    • IMG_20250902_122733.jpg
    • IMG_20250902_122654.jpg
    • Bosch spark plug direction.jpg
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    2025-09-02 Test Headunit Max Volume vs Frequency To test how the equaliser setting & input voltage affects the max vol level just...
    • max vol vs freq.jpg
    • IMG_20250902_121401.jpg
  • 1275
    1275 reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-01 Check Brake Wear Discs are wearing smooth & evenly All the pads wearing evenly, front inner pad has a slight lip Front...
  • 1275
    1275 reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    The "switched 12v feed" for the headunit, which has to run through the IGN switch & immobiliser & extra crimps, seems to get only 13.67v...
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    2025-09-01 Check Brake Wear Discs are wearing smooth & evenly All the pads wearing evenly, front inner pad has a slight lip Front...
    • front.jpg
    • IMG_20250901_141443.jpg
    • IMG_20250901_141452.jpg
    • rear.jpg
  • pollyp
    pollyp replied to the thread PollyMobiles Rebuild.
    The "switched 12v feed" for the headunit, which has to run through the IGN switch & immobiliser & extra crimps, seems to get only 13.67v...
    • Output-bypassed-12v-(max-EQ.gif
    • Output-bypassed-12v-(flat-EQ).gif
    • IMG_20250901_205532.jpg
Show older items
Back
Top