• Please only use these forums for blogs, they are not a discussion forum

Reply to thread

Just a couple more pics.


The first shows a reinforcement plate I welded onto the rear seat tub. This is where the stabaliser bar for the diff will bolt to.


Sencond shows some of the rear seam welding, looks poor but I've since ground it back and re-done it (had the wire speed too high on the welded).


Third is its maiden push outside just to wash some of the crap off it so I can actually see what I'm doing.[ATTACH=full]41310[/ATTACH] [ATTACH=full]41311[/ATTACH] [ATTACH=full]41312[/ATTACH] [ATTACH=full]41310[/ATTACH] [ATTACH=full]41311[/ATTACH] [ATTACH=full]41312[/ATTACH]


Back
Top