Reply to thread

ok then i dont know k10 procedure but talk me through what happens...

 

you insert key and you turn one notch, what happens?

you turn another notch, what happens?

you turn another notch, does the car start to turn over?

 

you will have a 12v permanent feed to the ignition barrel and a earth (or you can just do one to any metal attached to chassis) - if you find this 12v feed then that wires to one of the terminals on the flip up toggle switch (big red thing) and the other terminal will then join to a terminal on engine start, acc 1 and acc 2.

When you turn the key it links some wires out. (this is where you will need a voltage multimeter to be honest) and see what comes on. So once youve found ur wire which becomes 12v + that wire needs to be cut and put onto the 2nd terminal on acc 1.

turn the key again and another wire will then become 12+ (if you got another notch which doesnt attempt to start the car) then put this to the other terminal on acc 2

the starter motor wire (the final notch) is what needs to goto the engine start button.

 

Hey presto its wired :)

 

a ignition barrel is just a set of switches inside one barrel. Your effectivly opened up that barrel and shoved it on a plate! if you understand.

 

any confusion let me know :)


Back
Top