Signed up as a trial-member to see the guide (and other guides as well).
The guide as such didn't help me that much. My Micra is a '92 LX-model (for right-road-drivin') and I do not know from what model my new dials were from. The only (for me) usefull information in the guide was that the pin for +12V-clock was the pin for the -coil.
I had to spend some hours figuring out the swap of wires between the two connectors. (by comparing the back of the dial-housing.) It is not that difficult but perhaps I should write a few word in the guide about what I did - in case others might get the same problem.
When idling the rev are about 1500 RPM - I find i quite high (for a very standard-engine Micra)
What is your RPM's when idling?
Best regards - and thanks for replies
Akaup.
