Here are some more shots of what I'm re doing on the 110k one.
When this process of glue is added and sets you can then sand it down and re assemble..
It might work this time for me because last time it didn't want to set and I lost interest quickly knowing my installed one was much nicer.
But here we go let see if it does work.
You can mix baking soda I think with the glue for a more solid repair.
My glue is industrial tho so I'm not concerned over making it stronger the only down side is the finish will be clear so the cracks will still be visible for me.
Don't forget before you add any glue you need to thoroughly clean the part to make sure contact is made and it sticks.
For that I'm just using some paper towels and a few drops of rubbing alcohol.
[ATTACH=full]71922[/ATTACH][ATTACH=full]71923[/ATTACH]
Sent from my ASUS_T00P using Micra Sports Club mobile app
