Reply to thread

Just done mine today,I removed the glove box lid,the heater blower housing and the housing that carries the pollen filter and heater matrix is in front of you,the back wall of the glove box is blocking access to the filter,I cut from one hole to the next on the left only,the bracket hinges enough to get the filter changed with out cutting the piece out,I did mark the cable for the recirculation flap in relation to its securing clip before I removed it out of the way,a 70mm X 30mm piece of metal with two holes drilled in it on the bench was held in place and the plastic drilled and bolted to it to secure it.

Trying to post a link to a picture.

Jim

http://i574.photobucket.com/albums/ss188/AJKby/PollenFilter1.jpg

http://i574.photobucket.com/albums/ss188/AJKby/PollenFilter2.jpg


Back
Top