Reply to thread

Item: Full K11 Turbo Kit

Location: Dundee Scotland

Condition: Better described below

Reason for selling: Moving onto bigger things

Price: £900


Ok guys here are the parts included:  Turbo manifold- this is a Toyota glanza manifold which has been made to fit the micra. It recently cracked before it was removed but has been sorted to a good standard  Td04 turbo- I rebuilt it before first use, there was always slight play in the shaft but never smoked, after the car broke there was oil in the compressor side of the turbo so I'm guessing the seal has blown or something. Shaft play is still slight but will need to double check  Down pipe- it come with the glanza manifold and it was also made to fit. In good condition  Subaru forester oil feed- in good working condition, comes with the 4 way block connector at the head so other things can be hooked up  Sump with oil return- self explanatory, didn't leak once since I done it properly, uses a 90 degree silicone pipe to connect to the turbo  Intercooler- it's front mounted and I chose this one to get the shortest route of pipe as it looks a bit more tidy, some fins are bent but never bothered me. This could do with some brackets welded onto it to secure it properly at the front, I had it sat inbetween the front centre support and radiator with it tied through the radiator  Intercooler piping and bends- in good working condition, lower section is heat wrapped. One part of the bends has been cut into from the front panel although not all the way through. Will throw in spare heat wrap and metal ties also spare t bolts for securing  Maf sensor- this is an s14 sensor, comes with plug and is wired, just need fitted to the car  Custom fuel rail- this is an rb25 fuel rail made to fit the micra, powder coated in white. Comes with 370cc injectors and is straight fit  Fuel pump- this is a 255lph fuel pump from matt humphris, can't remember if its a Walbro or a sytec.....  Exhaust- 2 1/4 inch custom power flow exhaust from the down pipe back, has a silencer but no cat and features a 3.5 inch tailpipe, also a bung is welded at the front for a Wideband sensor  Air filter and flexi is also included, flexi isn't in good condition, before e engine gave up I planned to get rid of this and pipe it better. Will share my ideas with the buyer  Will throw in any spare parts I can think of too!   Any questions get in touch! Ill be at JAE but sadly won't bring all this as there isn't room in my car with all the rest of the stuff.


Back
Top