Please only use these forums for blogs, they are not a discussion forum

Reply to thread

Message: <blockquote data-quote="novocaine" data-source="post: 885450" data-attributes="member: 42258">not sure how I've made another year, but I have. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite13" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /> nothing major for this year. MOT flew through. I did replace the front discs and pads and service the calipers, along with new shoes and springs in the rear. had to do a ball joint, but meh. also did the subframe front mounts while I was down there, which lead to doing the outer tierod ends so the tracking could be done, as it had obviously been done with shagged subframe mounts. picture taken just after I'd finished, hence the floppy string. this **** used to be so much easier with a flat garage floor. [ATTACH=full]89201[/ATTACH]There's a whistle developed on rundown which I suspect is the drive belt tensioner, that will get done soonish, worst case it's not and I have to change the alternator or water pump next but I think it's the tensioner, which I should have replaced when I did the belt to be honest. my Micra badge finally fell off a few weeks ago during washing. I could have reattached it, but I decided to go a different route and match the DOTsr badge instead. no idea which bit of the car is Nismo, but I did it anyway. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite13" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /> [ATTACH=full]89200[/ATTACH]</blockquote>

Verification