Reply to thread

Message

<blockquote data-quote="bombz4" data-source="post: 112608" data-attributes="member: 1948">cheers andy was begining to think that i wouldnt get a reply. You&#039;ve actually hit the nail on the head! i haven&#039;t connected the interior light or the indicators!as for the interior light i havent even looked into it yet. any tips?and i do have a haynes and wow! i would have never thought that indicator circuits were so complex! even my avionics tutor (aircraft electronics) couldn&#039;t even give me a clear idea on which cable i needed to light the hazards!!!! which kind of scared me because he is usually very competant.as for the ignition after some logical thinking if tomorow i quickly conect two wires to a 12v bulb i can work out which wire is which. (il try the haynes first tho)as for the remote start although i have been told it isn&#039;t going too work, i feel that ive got it so i might aswell try it! (i think if the choke was left open slightly it should work, its manual because i&#039;ve got a webber on.)also my alarm only has one port for a sensor i have currently connected a shock sensor but i also have a microwave sensor. im unsure wether i can connect both together or not through the same port (it seems a waste of time attempting this for it to fail) any ideas?again thanks for the reply and i am slowly getting there!!</blockquote>

[QUOTE="bombz4, post: 112608, member: 1948"] cheers andy was begining to think that i wouldnt get a reply. You've actually hit the nail on the head! i haven't connected the interior light or the indicators! as for the interior light i havent even looked into it yet. any tips? and i do have a haynes and wow! i would have never thought that indicator circuits were so complex! even my avionics tutor (aircraft electronics) couldn't even give me a clear idea on which cable i needed to light the hazards!!!! which kind of scared me because he is usually very competant. as for the ignition after some logical thinking if tomorow i quickly conect two wires to a 12v bulb i can work out which wire is which. (il try the haynes first tho) as for the remote start although i have been told it isn't going too work, i feel that ive got it so i might aswell try it! (i think if the choke was left open slightly it should work, its manual because i've got a webber on.) also my alarm only has one port for a sensor i have currently connected a shock sensor but i also have a microwave sensor. im unsure wether i can connect both together or not through the same port (it seems a waste of time attempting this for it to fail) any ideas? again thanks for the reply and i am slowly getting there!! [/QUOTE]

Verification