Search results

  1. Mach1

    Spark plugs for nissan micra K12 2004

    go on e-bay and type in your model year and engine and you will get the results. go for decent spark plugs, I use NGK, or Denso plugs.;)
  2. Mach1

    Door Trim Clips and boot interior lining clips

    Its all about modifying an original idea (originally thought of by Nicola Tesla!) I think a high speed high torque 12v motor with two pulleys attached and then connected to one small alternator to power the motor, and then the motor will then power the 220v large Alternator with no draw which...
  3. Mach1

    Removing Interior Door Grab Handle- Passenger Side- K12 Micra

    The pop out pins are there to force the internal latches against the steel roof liner when they are back in place, so hopefully now you have popped them out, put a small screwdriver in at the sides of to finally pry the tangs out of the sockets.:unsure:
  4. Mach1

    Door Trim Clips and boot interior lining clips

    Having a practical background will help alot when you go for a job, I grew up in the bike racing padocks, so learned a lot about engines and hydraulics etc, this leapfroged me into a top engineering post later. keep up the good work, take alook at this which I am going to try soon. :
  5. Mach1

    Door Trim Clips and boot interior lining clips

    I am glad things worked out, its great to bring things back upto working condition, a bit like keeping the micra's on the road! I am going to tinker with an" infinity motor" and see if it works for me, only untill winter is over.:unsure:
  6. Mach1

    Door Trim Clips and boot interior lining clips

    Make sure all fittings and seals fit, as the pressure will blow it apart otherwise. The chimney nuts are best bought in bulk, as the front bumper uses them as well as other areas, I change them every time I come accross them, and renew the screws or bolts with stainless steel replacements. (y)
  7. Mach1

    Door Trim Clips and boot interior lining clips

    Yes weird name, but as they were first used for flues on stoves and ovens, then it make more sense. :unsure:
  8. Mach1

    Door Trim Clips and boot interior lining clips

    E bay, they are called "chimney nuts" you can get them in all different lengths.;)
  9. Mach1

    2010 Visia MOT Fail - Lambda Readings too high

    Try some MANNOL 500 ml Octane Plus Performance Booster Petrol Fuel Additive Super Benzin, off ebay, mix with petrol and give car a good run down motorway once car is upto temperature, this should clean out the build up of gunk in the system, car with that low mileage for it's age will need a...
  10. Mach1

    K12 stacked at high beam

    A quick check shows that:The H11 bulb is one of the most commonly used bulbs. It can be used in low beam, high beam , or fog lights on many vehicles. "The H11 is a single beam bulb and can be used in one position only".So you need to change the bulbs to H4. then you will get back the high and...
  11. Mach1

    K12 stacked at high beam

    Welcome to the club, I was wondering what the headlights do when you flash the headlights using the stork? do they flash high or low? if they flash low when they should be high, then you need to cross check the wiring with a schematic.:unsure:
  12. Mach1

    Idler Belt pulley for alternator

    K12's are Pretty bullet proof if you look after them, modern cars mean more expense and higher service costs as they are an electrical nightmare, I have had them and will not be recommending them if you are on a budget. The inner wheel arch cover is essential to keep road crud and GRIT out of...
  13. Mach1

    Yes it's probably been done to death

    My Micra is diesel, but my other cars are Petrol Suzuki's, as soon as this E10 crap was introduced is obvious that you will get lower power and MPG from this crap, e.g for paying full price at the pump (which is about 77% tax anyway) you only get 90% petrol, So I use a benzine mix which...
  14. Mach1

    Idler Belt pulley for alternator

    Information on Micra 25 ( edition to celebrate 25 years,Nissan's presence in europe) s://uk.nissannews.com/en-GB/releases/release-13672-micra-celebrates-quarter-century-in-europe-with-25th-anniversary-edition;)
  15. Mach1

    1.4 auto stalling when warm

    I would first change the air filter, run the car on petrol/injectors cleaner additive for a while, plug a OBD2 scanner in to port to monitor ecu for starters.:unsure:
  16. Mach1

    Nissan Micra K12 C+C Driver's door lock

    Glad, we all have to go that extra mile sometimes to source parts we need, but I personally think, the Micra's are worth keeping going. looking at modern stuff, when you factor in the maintenance costs of these technical marvels they are not worth the grief, just try pricing up LED headlights...
  17. Mach1

    Nissan Micra K12 C+C Driver's door lock

    Try this web site, failing that eBay has plenty of C+C cars breaking for parts.:) https://www.autodoc.co.uk/car-parts/locks-exterior-10787/nissan/micra
  18. Mach1

    Blower

    Try this video for tips in replacing the motor (blower):unsure:
  19. Mach1

    Blower

    Try a free download of the worshop manual .:unsure: https://manuals.co/workshop/nissan/micra-k12
  20. Mach1

    Suspension Arm OSF

    Try this web site, you can locate your precise model and engine, look at the schematic then you will have a description of the part you are looking for together with a part number which you can then order from a auto dealer.:unsure: https://nissan-europe.epc-data.com/
Back
Top