Search results

i got the same problem in i reckon the lock gets worn and dont sit right on the latch if you solve your rattly boot let me know how.

connection checked and rechecked but guess what the rubber seal gasket is shafted so i silicon sealed it in and the dizzy has a crack around the screw holes where i overtightened it would this cause a spark leak and me problem

i put on me micra a new dizzy cap and rotor arm and put in new plugs gaps adjusted 1.1mm etc now the bloody car judders every now and then doing me head in whys it doing this when it judders every now and then the engine management light flickers very briefly not flashing

is the 10w 40 fully or semi sythetic

it could be the temperature sensor located on the engine block beneath the distibutor theres 2 of them 1 for the dash temperature and 1 for the ecu which should have bigger plug this is the one that plays up sending wrong temp info to the ecu causing it to run like **** i had same problem and a...

give me a discription of what you mean off set +35 +40 i put the rims on and they fit fine handles like a dream now so ive no need to mess with suspension. Problem is there only on about a millimetre around the centre hub is this a problem for me apparently they came off a micra k11 same as mine...

would having bigger rims affect fuel enonomy from the standard 14 inch steel rims

would having bigger rims affect fuel enonomy from the satndard 14 inch steel rims

i use 5w30

got some rims off ebay.co.uk got em for 100 quid the guy reckons the tyres are ****e but the rims are good when i got them, the rims are pure ****e and the tyres are really good so and filled em and rubbed down now i was going to spray but you know what me micra isnt tip top condition so im not...

will 15x195 rims fit a k11 suspension not modified just standard