Search results

There is no thread on the wiper arm. If you mean the knurl inside, clean it before refitting, that doesn't work use some shim stock (thin metal) or some bonding loctite something like 638 when installing the arms.

https://www.ebay.co.uk/itm/325392788049?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_z9zYpC_SmW&sssrc=4429486&ssuid=l7_5w4uuSpG&var=&widget_ver=artemis&media=COPY

When did you last change your pollen filter?

https://www.ebay.co.uk/itm/295808630282?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=axkricaitns&sssrc=4429486&ssuid=l7_5w4uuSpG&var=&widget_ver=artemis&media=COPY Or just the link arms...

There is no bulb fail detect circuit. There is no canbus on a k12 that connects to the lights in that way. The relay works on the amps drawn from 3 bulbs (about 1.2 amps) , when one bulb goes out the amps drawn goes down and the lights flash quicker. (There's a bit more behind this as it's to do...

Whole door card. It's a one peice unless you want to be brave and then you need to remove it all anyway as its staked from the back.

Breakers yard for a new door card. Search ebay for micra cc breaking.

Rear spring corroded isn't worth dealing with, it will never be a fail until one snaps. Isn't technically an advisory, but some places put it as its an easy job they can charge for money for. Brakes, do as suggested. Soon. New fluid and a seal service won't go a miss. Ball joint, service...

did you torque the bearing to correct torque? are you sure you put everything back as it should be inside?

https://www.ebay.co.uk/itm/204087579985?hash=item2f84915551:g:kegAAOSwQV5jGZEX&amdata=enc%3AAQAIAAAA4I0Ag1Q5pmNrdEUZ1HeblfE6yhe6wC1edQI4PAH%2B7LU4SjG94XGgHldLYkQC8xtGi5A6NY14mn7%2BWq4A0XsCoaXhJdsxRqCDCCq3qhGO3fUb13x%2BWeuwuJJ%2F0voSZgVhy%2FVm5svnJIRBXQ%2FrlEbt8%2BQ7hfb%2BYMWW2pjGCQT2LIX57tkdcsmZ2...

this ones rears look to be in good nick...

They are specific pieces with a molded end, nissan stopped holding stock of them about 2015. If they are for a cc then theyll be the same. If its generic scraper then you have to do the whole lot and it will look a bit naff Someone on here cut and shut a set from a normal micra. Have a...

Ebay breakers. Not a chance you'll find new so part number is useless. Do you mean door trim as in inside or window scraper as in black rubber bit on outside. The later, they all bubble I'm afraid, goodnluck finding one that hasn't.

Why? I mean, yer do it, no reason not to, but nothing in the first post suggests there's an issue. A coolant flush and swap won't do any harm though if it hasn't been done for a while.

103 to 110 is normal for most cars. It's a pressurised system meaning the water can go above normal boiling point.

Minor alterations. Had some odd issues with the steering controls so decoupled it using a pair of diodes. Neater now too.

For those who want to change their stereo but want to keep steering wheel controls. Here's how to do it on a headunit that ypu can teach the buttons to. You need to male a mini loom to take the 3 wires from the wheel down to 2 wires. This needs a 10k resistor on one of the 3 wires. Here's a...

No bolts. They are originally a two sided pressed metal fastener l, but they aren't easy to obtain. These will work fine. 20 Pieces Heat Shield Clips Exhaust Heat Shield Clip Nut Washers Metal Locking Star Washers Underbody Heat Shield Clips Fasteners Fixing Clips for VW 30mm...

I found a friend for Dot.