Search results

I can get you specific parts to a manual but its all online at Nissan and cant be downloaded. CD Rom was rendered obsolete years ago. The engine, K9K is indeed a renault diesel engine. Its Common rail and as you will be aware the filter has loads of pipes connected to it. The filter is behind...

Hi Andrew PM me for details of how and where to check. FYI An oscilloscope can diagnose this too without getting dirty, lol Even low mileage chains stretch the reason is this:- Unburn hydrocarbons attack the chains and they go weak.

Remove both a pillars pull up and take off the top of the dash, on the passenger side you wil see a control unit at the bulkhead It says Johnson Controls on it. Thats the BCM, Body Control Module. Try unplugging and powering down, also undo batt neg terminal leave both disconnected half hour...

We use 10 40 at Nissan, magnatec

The early k12 suffered with sticking gear selectors. The fix is to remove fifth gear casing and hit the selector rods that are sticking down. To be honest it never worked that well anyway. Best thing to do is drain some oil out and top up with 5w40 engine oil, it will make it smooth as silk...

**********important************ if you ever replace eps on k12 you must disconnect battery before plugging new eps unit in or you will blow the dongle in the eps. Your steering will work but your key lamp will flash in red after a few miles, reason being you have blown the dongle. Fault code...

Had several delivered at the dealership. Going on a course end of jan. Its built at chennai in india. Its 100% new. It only is available as a 5 door vehicle. 2 new engines:- hr12 de - 3 cyl hr15 de 4 cyl has a new feature which assesses the gap in parallel parking. Im not keen on...

WE USED TO DO THIS BACK IN ABOUT 1996. IT WORKS WELL. BOUGHT A FEW TRADE INS IN THE PAST ON THE CHEAP UNDER THE PRETENSE OF THE MAFS BEING 400 QUID ODD. DEALER PRINCIPALS NOT BOTHERED TO LET CAR GO TO US MECHANICS WHEN THEY CUT OUT ALL THE TIME HEHE:laugh:

HI LADS, SCOTT HERES THE LINK http://www.micra.org.uk/threads/36911-Micra-Pulsar-SR20DET

I think it s chris. Who`s the lad who posted pics of a red k10 with an sr20 DET? I also saw an SR20 DE with 2 black fellas on it. It might be easier to ask them how they did it. Got loads to do though before I can start it, it should have been started in oct last yr but I keep having work to do...

thanks Shaun!!! nice to meet ya

in the trade we rev them with heater controls set to hot, until the pipes at your bulkhead under bonnet are hot. Leave the top off your rad while you do this. If you still cant bleed it try putting the top back on the rad and remove one of your matrix hoses and back bleed it with a watering can...

Cheers Frank! By the way does anyone know how the lad with the red K10 managed to set up the drivetrain ? It looks like the shafts havent been cut etc. Looks like he modded his bottom arm with rose joints to fit a pulsar front hub. I could be wrong, im just going off the pics I can see. Im...

Your s14? Red with 350z rims by any chance? MT at Warrington Motors, Are you the guy from BMW next door?

Hi lads and gals, im Ben, had a few micras in past, 2 k10`s and 3 k11`s. Been hummin and hahing for years about building a quick micra. Built my garage last year and currently fitting it out . Hoping to start a K10 SR20 DE build. Black , coilovers, plainish 5 spoke rims, stripped out, discreet...