Search results

A quick check shows that:The H11 bulb is one of the most commonly used bulbs. It can be used in low beam, high beam , or fog lights on many vehicles. "The H11 is a single beam bulb and can be used in one position only".So you need to change the bulbs to H4. then you will get back the high and...

Welcome to the club, I was wondering what the headlights do when you flash the headlights using the stork? do they flash high or low? if they flash low when they should be high, then you need to cross check the wiring with a schematic.:unsure:

K12's are Pretty bullet proof if you look after them, modern cars mean more expense and higher service costs as they are an electrical nightmare, I have had them and will not be recommending them if you are on a budget. The inner wheel arch cover is essential to keep road crud and GRIT out of...

My Micra is diesel, but my other cars are Petrol Suzuki's, as soon as this E10 crap was introduced is obvious that you will get lower power and MPG from this crap, e.g for paying full price at the pump (which is about 77% tax anyway) you only get 90% petrol, So I use a benzine mix which...

Information on Micra 25 ( edition to celebrate 25 years,Nissan's presence in europe) s://uk.nissannews.com/en-GB/releases/release-13672-micra-celebrates-quarter-century-in-europe-with-25th-anniversary-edition;)

I would first change the air filter, run the car on petrol/injectors cleaner additive for a while, plug a OBD2 scanner in to port to monitor ecu for starters.:unsure:

Glad, we all have to go that extra mile sometimes to source parts we need, but I personally think, the Micra's are worth keeping going. looking at modern stuff, when you factor in the maintenance costs of these technical marvels they are not worth the grief, just try pricing up LED headlights...

Try this web site, failing that eBay has plenty of C+C cars breaking for parts.:) https://www.autodoc.co.uk/car-parts/locks-exterior-10787/nissan/micra

Try this video for tips in replacing the motor (blower):unsure:

Try a free download of the worshop manual .:unsure: https://manuals.co/workshop/nissan/micra-k12

Try this web site, you can locate your precise model and engine, look at the schematic then you will have a description of the part you are looking for together with a part number which you can then order from a auto dealer.:unsure: https://nissan-europe.epc-data.com/

Poor acceleration you can start by replacing the air filter and put some petrol additive into the petrol to help boost the performance and clean out any build up of carbon that could be clogging up the valves and pistons the smoke you describe when accellerating is it blue or white smoke?

I think looking forward you may need an Electric Die Grinder, which would suit your needs, it is a lot more robust & has a 6mm chuck that will take gringing wheels, de burrers, and also the attachment i showed you earlier which will accept the 4" cutting discs.:)...

without the correct car details a generic starter for your 1.2 is part no; 233001F771. around £60 on e-bay

https://www.ebay.co.uk/itm/303551018525 I use these adaptors for my flexi windi driver when I cannot get in to tight places with the angle grinder with a cutting disc, they also fit well into a portable router motor and chuck also a fast electric drill. but be careful as there is no safety...

Take off the boot wiring gaiter in the top corner of the boot when rear hatch is open, wiring there can become brittle and break internally,and cause ever total voltage failure or intermitent faults. Its common to get this, I suffered the same checked all, and it was the wiring that came out of...

That should help you, lots of times its easier to chop off the heads of bolts etc than trying to deal with corroded nuts and bolts. good luck with your project.(y)

Check the direction of the pulley as if the direction is anti-clockwise then it may be the bolt is a left hand thread! ( so the bolt tends to keep tight when under rotational stress) similar concept to one of the pedals on a push bike which is left hand thread. Also a heat gun is too broad a...

The pulley head can be replaced quite easily, this includes a new bearing pressed into the pulley wheel, as this part takes the most load and movement, this should be ok to renew for now, the auto tensioner is quite sturdy and designed for long service, when you remove the pully head spray some...

I use a 200Ml bottle and put it in the tank and put 20 Litres of E10 in the tank, or you can use 100Ml bottle and put 10 Litres of fuel in Etc. Once this additive gets to work after a good run, you will have cleaned most of the internal gum and tarnish from the injectors and carbon from top of...