Search results

But I've gone trough 2 full tanks? Surely It can't be any left? And the cap has always been on tight..

Update! STILL NOT SOLVED I picked it up, and the bloke said that the fuel pump was not showing the right resistance. He then figured it was the fault. He swapped it, took it for a short drive, and said it was fixed. It obviously was not. The second I flipped the key, it instantly changed for...

I am now on my way to collect it, He said it was fixed after he replaced the pump. Will update soon tonight!

Update! My mechanic said they are going to replace the fuel pump. He ran out of time so it'll be done tomorrow. Don't know how he figured that would be the problem, but we'll see if it's fixed tomorrow.

Black dash looks awesome! My first 100NX had a grey dash, and my current GTi 100NX has a black dash. Black>grey for sure!

Could be, we'll know for sure within 24 hours, it's at the garage now. Keeping you posted tomorrow!

Took a break from it now, and yes, I started looking for split things. Found a split hose from the charcoal canister that i fixed, but that had no affect on the idle/performance. My OBD2-meter will be here in two weeks, but I'm not sure if I can stand driving it for that long. It really feels...

Ok, changed the filter (large Ford Mondeo style), and the preassure seemed fine (squirting everywhere!) No change... Next?

I'm going to change the fuel filter now (got a large universal one), will report back in 30 min!

Okay, I got my hands on a throttlebody, complete with MAF, TPS and IAC. Installed it a few minutes ago. No change! Dang, what should I test next?

Tell him that you'll start cleaning it of you can use it to go to and from work? A bucket, soap and brush surely can't be that pricey? Unless he demands that you go to a car wash?

Unfortunately, I'm from Vaasa, so I'm not very near you... I am on the lookout for a TB/MAF, but no luck finding a free so far. My grandfather has a 1.3L, but that has a bosch MAF, so it's not compatible.. I hope to find a cheap MAF, so I'm gonna take contact with some scrappies this week...

Update! Put some Injector cleaner in it, and filled it up with a full tank of 98 E5. Don't really think this is gonna help much.. Then, I set out to test the O2-sensor. Getting it out was a battle! I succeded, and put in a known working sensor from a Sunny. Here are the sensors. The Micra is...

Status update! First, the idle issues are not so common anymore, but the flashing check engine light, "kangarooing", misfires, every problem under load is still there. I first tried to disconnect the MAF, and that made things even worse. Car would stall at idle, the misfires/powerloss happened...

Thanks for the replies guys, I will try to disconnect and measure some sensors later today. I just need to change the valve cover gasket, since the old one started leaking alot after me changing the distributor. Is the TPS(Throttle Position Sensor) the same as the SR20DE? 0.5V no throttle, and...

Thanks guys! I'm already quite familial with Nissans, have tinkered with the SR20DE and GA16DE engines, but the CG-engine's common problems is quite unknown to me. Perhaps I'll post a build thread when I get it mechanically sorted. :)

Okay, so i tried cleaning the MAF with CRC MAF-cleaner, and took out the idle control valve (6-pin?), and gave it a good cleaning with carb-cleaner. No improvement whatsoever... Should I get a second hand intake with all the sensors? Or is it something else I should check? I also checked all...

Hi! Just joined this forum, I drive a 1999 K11 1.0L, and I joined mainly to keep my daily driver on the road :) It has given me some issues, I already posted a topic in the K11 mechanical category, but it says a moderator has to approve something first? Anyway, glad to be here, and I hope to...

Hi everbody! I'm Daniel from Finland, and i drive a Micra K11 1.0L CG10DE pre-coilpack -1999 with NATS. Recently, it has given me quite the headache. It all started when i accidentally flooded the engine two weeks ago by accidentally depressing the accelerator when starting. After solving the...