Search results

Lights are working great! Cause I'm in Germany I had to swop the reverse and fog wiring around as well. I'll type a guide up tonight for it if anyone is interested!

Think I've figured it, will try tomorrow. If it works does anyone want me to put a guide up??

Hi again, I have not been on for a while because of work. Been away quite a lot for the Army. On 3 weeks leave now so can finish the car! I've managed to get some facelift rear lights and wanting to put them into my Super S prefacelift. I tried the guide thats on here for the facelift to...

Saying that the most accurate GPS for cars is only within 3 metres. So no the GPS won't be 100% accurate either, so it probally a combination of the speedo set high and the GPS's 3m accuracy!

Another quick update. Managed to get the front panel and cross member off eventually. Some of the tack welded nuts broke loose thanks to the rust, so a bit of a struggle, some blood (literally) its off. Just to show the back of the crossmember and I'm sure it'll be understood why I needed to...

Another quick update. Took my 3 and a half year old girl with me to camp today to do some more work. She's a real lil spanner monkey. Just had to ask and the correct tools were passed. lol Managed to get everything stripped out that needed to be ie radiator, horn etc. just grinding left now...

Hi Quick one. Have you got any idea how to change the title of my blog? Tim

Thanks for the congrats! Wiper motor arrived yesterday and it is working perfectly!! So that's one more thing done. Took an hour earlier to go and strip down the front of the car. Found a big hole on the drivers side of the crossmember, and there is no metal at the back anymore. But got my...

Things been hectic this side. Wife had a our son yesterday, so first time in a lil while that I can relax a bit. Sorted out a few things. New crossmember and panel arrived earlier this week so just going to take my time replacing it. An hour a day worth of work. I bought a wiper motor off ebay...

It's not working because of the earth. When I did mine I ran an earth from my hazard switch down to the raido's earth point. You can also run one from the cigarette lighter. That sorted mine out, so give it a try. Tim

Fitted the other front spring and shock earlier. Checked the rear which was slightly higher and it needed a quarter turn to fit in properly onto its recess. The car still has a very slight lean to the passenger side ut much better now. Took her for a good drive, and she handles really well, so...

Will do and thanks. I'll check the rear again and make sure they are definately seated properly. Can't beat double checking lol. Hopefully that'll cure it! Tim

I got the springs for nothing off a scrappy, but the off a facelift, which shouldn't matter. I got the other front spring complete with shock (nice and easy to fit then (Y)) I'll fit the other front one soon as and see about the front lean. Not driven it over anything bumpy yet but it's...

Fitted rear springs and the driver's side front as well cause the car was leaning to the drivers side. When got the front spring out it made sense why it was leaning at the front. Snapped spring!!:doh: Then I got the rear springs out. Now can anyone tell me whats wrong with this picture??? :p...

I'll do that then. The car has been leaning to one side so I got new springs and shocks and just going to put them in and that should sort the problem. I think the previous owner lowered the right hand side but forgot about the left (Y) I'll know for sure once I got the old ones out. Thanks...

As you know I'm a VM in the army, it's just because of it being part of the suspension, specially the front, I just wanna make sure I don't mess with the safety factor. On the other hand, I'll just make sure it's on tight and might just Loctite it for good measure. Because all the work is...

Hi, I don't have a Haynes Manual, but got a german one and it only gives me the torque settings for the rear shock which it says is 90Nm (bottom bolt). Can someone confirm this? Then if someone can look in their Haynes and tell me the torque settings for the front bottom two bolts and nuts...

From Nissan themselves if you only need one. Otherwise try the scrappy's

Here's the problem. In Germany the right hand drive Micra's wiper motor is on the oppisite side of the firewall and the connectors are different. A K10 wiper motor on the other hand is on the correct side to the English model of the K11, and the connector looks the same! The question is would...

Things have been a bit hectic at work over the last week so not to much has been done on all fronts. Plus got a hockey tournement for my Sqn tomorrow! I managed to get the drivers window from a scrappy and fit it just to stop any rain getting into the car. I also found that the plastic lugs...