Search results

I've one on an engine here in essex it's of a 1993 model cg10 if you haven't sorted one yet

Oh when I pulled the hose off and filled up , put the water in the rad and waited till it came out of the matrix just in case I confused any one

Ok I'll be told to shut up but have you had hot air come out the vents that's a good sign it's blead also when I did mine I took off the top hose to the matrix that's in the car and filled it up till water came out of there and popped the hose back on and tightened back up , also I had a simular...

Though the case was under pressure meaning it would blow rather than suck and that's how the felt pad gets closed up ?

Researched this a lot and it also helps keep the oil better for a little longer to as the chap the engines trying to burn can't get back into the oil and just keep recirculating , there's been engines that get there insides caked with all that unburnt oil sat at the top of the engine also the...

It's a simple rod that goes to the gearbox there is a spring that pulls it back to place buts it's a very small one

Hoping it's not to do with wires as tomorrow um going from Essex to hampshire

Nuts on full throttle and it's like it's holding back then going then holding back , also when it's hot it don't like starting as easy as if it's starved of fuel now have the ecu that came with the engine now would i be correct in thinking that it could be the auto choke as it really does die...

I have a 1.0 if I can remove it off the engine you can borrow that

The hugs are the same no need to change them as are the breaks too

So are the hubs I've found its on the road again an any one doing it make sure you get the loom to go with the gear box for neutral and reverse sender as on the 1.0 it's one plug and the 1.3 it's 2 plugs later I will list all the parts I used cheers for the help tho guys just going to swap the...

Neither have that now at the other car and got the gear linkage and got 2 bolts to pull out on the front of the wish bones ornate they both the same wish bones ?

How would I tell if it had other than the key

Not demo meant deffo

Nope 1.0 demo didn't not as sure bout 1.3 but it's loom was in bits where some one had attacked it to fit an alarm of some kind

Forgot to say also there both 1993 and have different shafts

Clio and polos I mean

Name of the cars gonna be running but rusting sleeper aha should be funny to see people's faces in there 1.4 clips and that aha

Oh as I've things in bits I've read you can De limit the revs ? Is that right or is that waffle . An I'm in Essex near colchester

I've got the ecu to match the engine going off to get the shafts hubs suspension legs as a lot and also the rear bar that goes to the rear gearbox mount glad I got the cross member that has the rear mount or else I'd not of fitted the engine but as I'm getting all that I'm also getting the anti...