Search results

when this happened on ours a couple of months we found the high beam light would come on on the dash even though the highbeam bulb wasn't lit and we found the 3 pin connector had melted we went to a scrappy and bought one ,if you go to a scrappy make sure you cut a longish length of cable this...

its far better to have the milage corrected so you know where you are with servicing and more importantly cam belts ( i know micra's have chains)

dont know where you are in ireland but here is a link for you http://www.logicautomotive.ie/speedom if they aren't local then have a google for digi dash repairs or anything along those lines i had milage altered on a previous car with a digi dash is cost me £25 if i took it to them the guy...

ye basically just that,if afterwards you find the car wont start in p or n at the bottom of the gear stick there is a nut and bolt undo this then you can adjust the link rod so the switch is activated in these positions.

for a powder clutch you will be looking at £780 ish for the job to be done i had a price given to me as we were finding it hard to move the gear selector but its sorted its self out

if your going to weld a reducer on,have it welded onto the cherry bomb then clamp onto exhaust system will make life so much easier as you can do a full weld all round on the cherry with no problem,you can also revert back to the original backbox with no messing round slide off slide on

as far as i am aware you can't use scooter ncb on a car policy

you should be able to have it welded back on BUT make sure you remove the plastic bushing in the bottom pic first or the bushing will melt

insurance companies like to screw you which ever way they can as i've said she's been making her own decisions for 7 years on her scooter

at the top of the accelerator pedal there are 2 micro switches ,you should have about 1/8" movement at the top of the pedal before the 1st switch is pressed if this needs to be adjusted the only way i know of it to adjust the accelerator cable. the 1st switch turns on the power for the clutch...

dont understand why it should go up though ??? ye i may of been a passenger with a full licence but what could i of done in an emergency ?? as its all down to the reactions of the driver like it is now unless you have dual controls fitted. i am probably older than a lot on here i am 44 at the...

kath past her driving test yesterday 1st time and i have now informed her insurance company, her insurance has now gone up £66 because she is driving by herself absolutely madness as she has a 50cc scooter thats she's been riding for 7 years by herself so its nothing new to her being by herself

from the haynes it is the green/white wire that is +12v and the black wire is earth

just thought if you use washer additives then the water will be coloured just squeeze the back seat cushion and see if the water in the cushion is the same colour as your washer fluid just to confirm if it is from the washer tubing

as long as its a plain round pipe then you can use a joining connector ,if the break is near the rubber boot between the tailgate door and the body then replace the short length of tubing from the washer nozzle with a longer piece so the join isn't where it will bend. if your stuck for a joining...

it nice to see someone say thanks for the help that's been given and also to know that the job turned out well,more members should comment after they have completed a job so other members know the info is good.

what you need for the tailgate is a grommet is something like this one maybe a bit smaller http://www.toolstation.com/shop/Electrical/Cable+Management/Rubber+Grommet+20mm+Blind/d190/sd2460/p79733 make a small hole in it for the cable then if you want put some silicone around the cable to...

haynes to the rescue its the same fuse as the interior light battery fuse box F24 10A

just looked in the haynes and it stay the live wire is red / black (black being the tracer colour)

you normally have 3 major earths because if you have a break on 1 of the earths you still have 2 to complete the earth circuit if you only have 2 earths to start with then if you have a problem with either of them then you will have a break in continuity on cars in the past i have seen them...