Search results

i have owned 2 micras now, i've bought both on about 85k, and in both by about 90k the nearside drive shaft has died, is this just me, i do drive them rather hard, but its an amazing coincedance. has anyone else had to replace driveshafts at around the 90k mark, or has anyone driven their car...

in theory, if you can get the tb and ecu from a car with NATS, and fitted the ignition barrel (with the other key) aswell then the nats, shouldnt be affected, i dont know if the ga16 barrel will be an easy swap, but i know that at work when we had a load of keys stolen, we had to change the ecu...

you should be able to see the hole cos its likely to have gone black from the exhaust gases, bandage might work, but only on straight parts really, if its a flange though, which in my experiance with micra exhausts is quite likely, you'd be better of covering it in gungum

sorry, didnt realise it had been posted so much, just saw it and thought i'd show people

sorry to say this micra man, but i think i have found a k10 crazier than yours, although i have to admit its unlikely that it goes on the road, and it doesnt look as nice as yours, infact it doesnt look nice at all really, but then what do you expact with half a rover v8 sticking out of the...

alot of you will probably have seen this but there are three micra bodykits, similary to the kit that sr micra boy had on his pre-bbq sr, they have 3 days to go, but have buy nows for 295...

i was looking on ebay and found this pic, which reminded me of our msn convosation, thought you might wanna see it http://i16.photobucket.com/albums/b34/super_k11_1275/0d_1_b.jpg not sure what car it is, but the door cards are supposed to be carbon fibre, look good to me

Also Disc Of The K12 Workshop Manual, 48 Min To Go, No Bids Yet, Up To A Pound

K12 Rear Bumper On Ebay, Only 9 Min To Go But Its Only Up To 20 Quid Sorry For The Very Short Notice

excellent story, really interesting to hear how others have gotten the bug and what its caused them to do have you still got the front end of the car tho, and have you considered doing anything with that, maybe a nice sofa or something

if you are just after loud noise then i have found that sticking the filter directly on top of you throttle makes it louder than if you attach a pipe and have the filter near to a cold air source, i have done this on both my micras and it was the same with both, but i find that with a pipe you...

just found these pictures and had to share them, there of the new bugatti veyron, check out the engine v16 (yes SIXTEEN) quad turbo, looks good enough on its own, but when you consider its over 1000bhp out of the box, can there be a better engine...

due to a very large dent that has appeared on the rear of my car, the boot is definetly being smoothed

was a k11 super s, on an l plate, good condition to, looked really good in the low light

i was sitting in the car for about 15 minutes before i could even get out of the parking space, then when i managed to i was out through the pits in about 3 minutes did you see the cavalier in the first race, what a mess. and that pile up at the pit end with practically every car piling up the...

while on the subject of boot handles, has anyone got a decent picture of an import micra with a square no plate recess, i got one pic but you cant see much, but it looked good, thought i'd have a try before i smooth it

the majority of the things you have to disconnect to get the gearbox out, are between the gearbox and the body, and therefore will have to come of anyway, so really other than the starter motor and a few bolts, taking the gearbox of first isnt really that much of a detour

what state was your engine in when it went in, was it recon or just come out of another car, cos if it was recon then a 10,000 should be fine, but if it just come out of a another car then it would be worth while doing a full service (unless you have some history for the donor) just to be on the...

getting it out you could take the gearbox out, then drain all the oil out, take the head of and then get a couple of mates, and a few bits of strong pipe, like scaffolding poles and a chain, if it works on a renault 16v engine then it should work on a cg, just try to find mates the same size and...

you might want to get in contact with nissan, i'm not to familiar with there warranty, but with toyota warranty, you can get the discs replaced free for just having rust on the bits that dont even touch the pads just cos it doesnt look good, and if the discs scored then they might get away with...