Search results

Thanks for the help guys. Now what I need is: Air filter Fuel filter Oil filter + ring PAS/Waterpump belt Alternator Belt Now, last time all I did was get as fuiel filter from Nissan. I have been recommended going to 'A to Z' in Fenton (Stoke) but I have looked at them on ebay and the...

Hi, Following on from my thread on a proposed service: http://www.micra.org.uk/threads/37674-Service-help-please I have a decent set inc. sockets but nothing special. I also have ramps for the front wheels. I still have some questions on what I plan to do: Engine oil change - What oil...

Thanks for the info. Anything else I should take a note of? Any extra pointers? I plan to do the work at the end of May, as this is my first holiday from work since xmas!

Is there anything else I should change? I have listed the following to be done: Engine oil in oil filter and sump ring Sparks Air filter Can a novice do the brake fluid? I now intend to visually check the belts for signs of cracking or fraying. Thanks again for the help so far.

Thanks for the replies so far. Any comments from anyone else?

Well it has been a while since I last posted! I have a year 2000 micra 1.0 that is due a service. Three years ago, I changed the sparks, oil filter, engine oil, air filter by myself but that was all that was checked/changed. A year ago the car was serviced by a small indy and I paid...

I have a year 2000 micra (1.0 S 3dr). Before I owned it I think it may have been in a scuff and the passenger wing is rusting under the lip (that goes under the arch). A touch of this bubbling effect is creaping round to the front of the wing and so is visible. The metal lips on the other 3...

so i want the same alloys as dave off here. check the first link to see his car. http://www.micra.org.uk/showthread.php?t=8106 I found his alloys here, but what colour are they EXACTLY...

well I have some money and am considering alloy wheels. The same as Dave has on his red micra on this forum. I also want to lower the car 40-42mm. do I get lowering springs or do I need new suspension aswel? also wheres the best place to get alloys and or lowering springs from (and...

email is [email protected] cheers for the help guys you are loadsa help:k11motors EDIT: looking on ebay at 70mm elbows you can only get 90 or 135 degrees angles, yet when i look at the custom setup make of plumbing pipes both the elbows there look around 110degrees. any thoughts on this??

i could do this http://s151.photobucket.com/albums/s126/mglover070588/?action=view&current=2airboxes.jpg and add another cold air feed off ebay, which is what i will likely do (just like the previous link i posted with the red micra and the extra feed) i also could use the primera airbox...

http://s151.photobucket.com/albums/s126/mglover070588/?action=view&current=4fac_19.jpg exactly same as my car but mines red:) see no backbox, the tip is bent 90degrees down behind the bumper

come to think of it that was with CIS when i told them and im with NFU now dont think i told them as CIS said it isnt actually a mod. Think is i dont wanna do anything that adds premium, as im at uni and money is short at times. I will go a scrappy next week hopefully (still at uni not allowed...

ok il deffo check back tomorow:) say i did daveyc's setup do i need to declare it as an induction kit, as I really do see no use in insurance if its invalid anyway. thanks

help much appreciated guys:) yes please to the pic wil ldeffo help!! what im thinking of doing is making another hole (seen this on many micras) behind the normal hole that sucks air into the air box as i assume it will then sound just like a cone would. obviously i would use another air...

what year primera air box would i want. Why would i want a primera one?? i assume the size of the thottle body must be the same. I will get an airbox from a scrappy and get some feed pipe off ebay and route it myself. would this need declaring on the insurace?? i told them about my panel...

so what you mean is drill another hole in the air box behind the normal one and stick a cold air feed there with say a 8-10 cm diameter?? i want a new airbox so i can fit the stock one again when i sell the car in a fewyears time. Do all k11 airboxes fit all k11s?? as some of the pre facelift...

i have the k&n panel filter with my air feed unplugged but want something better. Can any of you here link me to the correct k&n induction kit as there are several around. Mines the final facelift micra (the 59hp version) that was made up until the k11 stopped in 2002. thanks

didnt realise i had to pay, thought it was a free forum oops. how much is it? and what exactly are shims and do they cost much

ahh yes. i have the bottom one where could i buy some of these then?? the other set i was on about are on ebay