Search results

@frank i have 9,5 mm lift , 2 shims under spring , and can put a 1.0 mm feeler blade between the lifter and lobe at full lift and still dont touch the piston or get coilbind. I do belive i also tested with a 1,5 mm and still good. Think it is 12,4 mm lift before you touch valve seal in std...

@frank dont leave them out , stuff them in there so that you dont have to throw them in the thrash. Recycling is the word :) @superls there are probably 6 ways i could have done this but i did it as you see it. For me it is an easy way of doing it and it got me my result that i wanted,,or...

@sleeper ss i have 4 other cars that i play with. 1 Micra + 1 micra ( have 5 Micras in my family though ) 1 Toyota Starlet rwd 1 vw beach buggy The picture is from my Toyota Starlet that i want to finish before next " season " starts. But here is some more stuff on the Evo cylinderhead...

@Elliot The N20 system will be introduced later,,,much later. As for now i have to get this project level to the end of the presentation as i have more stuff to finish on other cars of mine. Like this one here: If you like you can start guessing what car it is :)

1. It looks almost like you see in the finished photos exept that i have done the last grinding by hand to get the last details in there. 2. by machine and hand 3. the chambers are measured and worked together with the pistons , gasket etc.. 4. I settled for my intended ratio of my...

thanks again all for looking , hope you still find it interesting even if i get to mych "out " there :) @superls Thak you for your comment :) @Liio doing my best at what i like to do best :) @Alexzaki Thanks , well , it has started to frost very much here each night so it probably...

Got to push some more out here as i have more projects to work on... I have come quite far in my work with the Evo cylindehead and will now take care of some valve-seat cuts at the in / ex seats. This little thingy I use for setting the desired diameter to be transferred from the valve to...

oki , now i got it :) The pictures are alive and kicking ! Hopefully some more will turn up soon.....

i didnt get that one :)

There will be a demonstration of how you can use , modify , exhaust manifold ( 4-2-1 ) from another car , in the Maxi Micra project in not too long time. I think that there will be quite a few eyebrows going up in full mode after seing that :)

It is a friend who has the server and he is currently moving his company so he has to do some work every now and then that makes the pictures come on and off :) Normally thats just for some minutes i have been told.

:)

I have now my modified cylinderhead , my used and bigger , longer valves form another Jap car and my homegrinded camshafts. I now need some link between the camshafts and the valves so I will then , in a DIY fashion , modify my old OEM valve lifters that used to have shims , to a shimless...

@stani the inlet valve is not normally able to cope with the heat as often htere arer different materials in the In and Ex valves. On some engines it can be done thoug. @blobbltec Good that you now understand. @R-reg Not to many secrets in this i think , just knowledge :) It is a esy...

Thanks again for looking guys :) @Super ls The valves are from a Suzuki @R-reg At least we are doing major surgery inside the cylinderhead :)

Here is more on the valves: The upper ones is the OEM 1,3 engine valves and the lower ones the 1,6 mm bigger valves that I am going to modify to go into the Evo head for the Maxi Micra. The valves are bigger , longer and will provide more potencial in my complete build. They are not...

@Liio I cant garantee pidgeon up my sleeves but some pretty cool metal parts will probably fall down onto the bench on my way to a fisnished state of crazyness :)

Not so hard times,,,more fun times knowing how much more interesting the Maxi will be with this done to it :)

Alex , i feel quite lucky compare to you then :=) I have had my fair share of working in the snow over here , belive me. Last year i had to dig my car out at least 5 times just in January....brrrrrr :)

Thanks for looking again all :) @Liio I belive the right term is ; Blood , sweat & tears... :) Just kidding. This is actually quite rutine stuff but it might be new for some of the enthusiasts here in the Micra community , i dont know. But i like to show it so that everyone can see what...