Search results

just out of curiosity, why have you run two battery cables through the firewall? You only need to run one, this would have saved weight and money.

I had the same problem about 2-3 years ago. There is a holden pulley available, it is almost identical sized except for the centre hole. It is made of black plastic and has a sealed bearing. I was at the time working in a workshop that had a lathe so i just turned up a simple shouldered...

I had the engineer friend of mine (who did my five stud conversion) have a look at fitting a new bearing to the hub. I suggested to him that they were an unusual hub/bearing set up by the extreme price of them. He dismantled the bearing to inspect and said I was right, that they did not have a...

I replaced one rear hub late last year and if I remember correctly it was about $240.00 (this was for an abs hub and was a fairly discounted trade price.) I was going to replace both of them until I found out the price.

Which model sr20 supposingly has the same injector spacing between cylinder pairs 1-2 and 3-4? I have 3 types of sr20's (GTI-R, S13 and N15) and all of them have all injectors spaced further apart not just 2 and 3 as you have suggested. I am not saying that you are wrong but can you please...

I have motec m4 ecu to run the engine, I was curious as to whether the coilpacks/crankangle sensor would physically bolt on to the cg head/rocker cover to keep it looking factory. With the motec I can run either wasted spark coil packs or even individual/sequential setup, that is not the issue...

Does anybody know if the coilpacks/crankangle sensor/complete ignition system from the cga engine will physically fit on the cg cylinder head? I know electrically it is not compatible with the standard ecu but that doesn't concern me because I am going to use aftermarket ecu. I just need to...

Dave what you miscalculated is that the 185kw that the V8 taxi has is at the flywheel. While your car's 100kw is at the wheels, expecting a fairly efficient fwd driveline to only lose about 15% that would put car's power at about 117kw at the flywheel. Recalculate this...

does anyone know if this part is available through aussie nissan dealers?

you should be able to buy the bubble lights through your local Nissan dealer, they are from a 2000 March. I bought mine through Nissan they were $160 each.

the damaged thread should be able to be repaired with a helicoil. to do this the original thread is drilled out, a larger thread is cut, and then a helicoil is inserted to bring the hole back to its original size but with a steel tread inserted. these repairs are usually very successful and...

that is really a very good price. i bought mine new from nissan about 18 months ago and they cost $320 for both.

For you guy's who require anti freeze I strongly recommend genuine Nissan coolant (in the recommended concentration of course). I have never seen a corrosion problem when using this coolant and maintaining it properly (correct concentation and changed every 2 years or 40,000km.) I personally use...

It was a Micra lx with a CG13

YES I have seen this problem on a customers car at a workshop I used to work for. It bent a few valves. It was a very expensive repair. The genuine Nissan timing chain parts (a full set was used including new guides), the head servicing with replacement valves (as required), gaskets, new...

If you apply the brakes (pedal) while using the handbrake (wheels locked) you will find the abs kicks in instantly. If the rear wheels stay locked by the handbrake the abs prevents the brakes from functioning normally and you can't slow the car with the brakes (pedal) which can be quite...

Your right Tony there has to be a red reflector on each side at the rear of the car. I think that add on reflectors would look out of place, I think reflectors inbuilt in the lights is more tasteful- my opinion

Do the clear/red lights have an inbuilt red reflector? The bubble lights do. The lights need to have this inbuilt reflector to meet Australian Desing Rules (ADR's). If the clear/red lights don't I would definately go for the bubble lights because the are legal. Beside this I personally like...

I apologise if I am incorrect, but when I initially spotted a thread leading to a video of Uk Dave's SR turbo powered red k11 at the drags, I thought it was titled something like GTi-R is in k11? If I am wrong- sorry

I have VERY carefully studied photos posted by raceworx and Dave (you know the red k11 in uk). I spent many hours looking at these and measuring before I began my own SR engine coversion into a k11. I must say (in my opinion) that the conversion by raceworx is an engineering nightmare/disaster...