Search results

OBD2 scanner bout £30

I I had my car mot'd a while ago and it failed o a few things one of those being a rear wheel bearing so I ordered a new hub with bearing went to change it today, but there's nothing wrong with the one that's there put it all back together and the shoes and drum rub a little and that's obviously...

Just done a quick search there's a guy on nissanforums.com username phatg20 he claims to have manuals for all nissans from 1995-2005 on cd might be worth asking

Must be a Nissan dealer manual somewhere like elsawin for VAG

In not too sure tbh frank might be a good person to ask He might know of someone or maybe even have a copy

Ok cheers I'll take a look next time I'm out there I got some spare fuses I'll just fill the board up that should do it

What for extra full beams cause mine mains are accounted for

Oh really Bugga I was hoping they would all be the same

What TPI are the 10mm nuts and bolts on the micra please I sheared a few

I all I changed my crossmember today and when I had the bumper off I found a wire on the offside (two wires into a plug) just floating around reckon its the loom for the fogs? If so where might I find the switch end of the loom? Cheers rick

Oh I see lol, is the co-ax there and can you pull it through. halfrauds do a universal kit I think that if you can get the wire through you could connect up and just stick on then seal with some clear silicone if not yeah lining out to trace the cable and bolt a original on which would probably...

Get a small drill bit say 3 or 4 mm and then get a the same size "easy out" drill a hole in the centre of the bit stuck inside and the get your easy out stick in the hole and turn with your spanner anti clockwise it should grip the old piece and remove it with out damaging the threads inside the...

I wouldn't bother with a owners manual go on eBay and type in "Haynes micra manual " 1993-02 is what you need you can normally get a second hand one for about £8 it's the best book out there unless you can get a Nissan workshop manual think there's a couple of guys on here with them on DVD

Oh and I got it started again lol

Well after six hours of drilling, banging, grinding and a lot of swearing the new member is in its place FINALLY. Next stop the welders

Probably should have mentioned mines a facelift

Tomorrow will be the day (at last) that I change my front crossmember now to do this I need to remove the bumper I know but to remove the bumper do i need to remove the headlights also the Haynes isn't very clear Cheers Rick

Fuel gauge reading empty with light on I'm Gunna get some fuel later and I'll try the flooding trick also if putting fuel in don't help all the dizzy cap, arm, leads and plugs were changed last time it broke down (six months ago) and it turned out the shaft on the distributed itself had sheared...

My car failed its mot a few weeks ago and has been sitting since, I started it yesterday and it fired for a second and then died and now won't start the batt is fine turns over just as normal but just won't fire. Now the fuel was very low before I left it standing do you reckon it might of...

Pretty sure there fine a friend of mine had something similar on his Astra brake light and never had any probs on MOT etc