Search results

Starting bid: £14.99 Postage: £8.50 0 bids Time left 3days. or you could phone them and they mite end the bid http://cgi.ebay.co.uk/nissan-micra-k11-1-3-lock-set-/150554450474?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item230dbe9a2a

hey NeX have you checked ebay? link provided http://shop.ebay.co.uk/i.html?_nkw=lock+k11&_sacat=0&_sop=15&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_odkw=lock+micra&_osacat=0&_trksid=p3286.c0.m270.l1313 but don't be too hasty, mite find cheaper on hear

Bump :wasntme:

http://shop.ebay.co.uk/i.html?_nkw=micra+(clock%2C+speedo)+SURROUND&_sacat=0&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_odkw=micra+(clock%2C+speed)+SURROUND&_osacat=0&_trksid=p3286.c0.m270.l1313

http://shop.ebay.co.uk/i.html?_nkw=micra+Interior+Light+-led+-RAINBOW+-k12+-boot&_sacat=0&_sop=15&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_odkw=micra+Interior+Light+-led+-RAINBOW+-k12&_osacat=0&_trksid=p3286.c0.m270.l1313

hi everyone (Y) my tyres are on there last legs and need replacing but the steel wheels where curbed alot by previous owner and leak air around edges now i dont want to put tyes on them so i need a set of 4 or 5, 13" or 14" original alloy wheels (with or without tyres) as this will not...

so will a 1.3 ecu work on a 1.0?

hi frank the only gain i want is to loss the nats system b4 it trys to die on me when i am at work 15miles from home at 01:30 in the morning :doh: i have trouble with it for a while, every now and again i turn the key and the ecu light will not stop flashing or the car starts runs and then...

Hi every one ok a few questions. 1. how do i tell which version of nats i have? p reg 1996 1.0 see link http://img840.imageshack.us/img840/2793/cimg0289j.jpg 2. how do i tell which ecu is nat and non nats? 3. i have seen numbers on the ecu like 12, 15, 16, 17 and others what do...

Hi Swordfish i have opened my loom up from the ecu up to as far as i can go without removing the dash board but could not find that pesky little blue wire, so give up and cut the blue wire behind clocks and ran a wire from it to the blue wire on the dizzy. see link below provided by C0llis0n...

hi frank the blue/black wire goes to the dials but not to the ecu, as it originally did not have the rev counter they must have left the other end in the loom some where they know how to find it so they can charge you an arm and a leg as well as a couple of paints of blood :laugh: i am...

ok i know which blue pin it is, see photo. blue1 is to the clock bulb and blue2 is the rev counter. but still need to know were the outer end of the blue wire is located as it is not in the ecu. thanks

Thanks C0llis0n some parts are very helpful like the pins for the ecu, but it is how to wire up the aftermarket rev counter, i have the original k11 set of clocks with rev counter and need to know which blue wire on plug of rev counter to use and where the other end is because i cant see it...

Hi i have a set of dials with rev counter from a 1.0l s in green, how do you get the rev counter working? i have read you need to connect the blue wire to the ecu or dizzy, i have 2 blue wires (blue/black, blue/silver) already in the loom going to the clocks. what i would like to know which...

Hey Noddie Do you still have the dials? Are they just the 3 separate dials or is it the complete unit? Would you take £30 all in? (using paypal) Thanks :grinning: