Search results

man, from limited personal experience.... Since I've fitted 15's and lowered the ride 35mm ventura springs IIRC, also replaced all shocks to new genuine nissan... the ride has now overall become disgusting... the car handles turns under speed nicely, but personally I regret it... thankfully...

man you're a ray of hope, I'll soon go try it out..before it starts raining.. SO I'll try to straighten the inner cable inside the outer.. and straightening the outer cable and down force everything inside while holding the inner cable straight inside the outer cable...

I had and still have the same problem, from experience I connote this happening to when I first changed the low beam bulbs to led ones (the white LED's). It's only since then that I've been having the damn connectors melt over time. I've already gone through buying used connectors of a breaking...

I've been tweaking around the engine bits n bobs there n here. Supposedly I was looking for the clutch cable, and ended tweaking with the speedo cable mistakenly. the cable hooks onto the transmission by a round knurled connector onto the gearbox. I found this connector half way un-screwed...

I've installed power windows off ebay a year or so ago, probs then were that it started to slow down in having window come up, after I sprayed lots of 'lube' WD40 and Wurth stuff now the rubber has become f***ed, as it's all goo kind of greasy but it doesn't wear off. As I've removed all...

Thanks matey, of course it makes sense now! thanks mate how diligent you people are over here as always 've been through the years here at the forum.. Tomorrow morning I'll try hearing from close to oil cap by opening it slowly after it warms up to avoid the chain rattle.. My only...

It was It was screeched like mad, my dear lovebug micra

Higher revs seems to silence the noise although the engine goes louder but it's not the reason of not hearing it, I think it does get quiter with higher revs... Let me share the my rotten tomato thought, I've just fitted a Toyo and put my default wheel back....what about, I would slightly...

No no guys forgot about the chain rattle, that would have faded off in a minute as the vid is cold starting my micra. and I presume all micras do so on cold start and the car's always done so. What's of my concern is the noise that is heard towards the end of the video when I got in and starting...

This is the link to the video notice change in noise upon pressing clutch, this is this morning and the noise gets worse than this after a drive, but to not much, just to get you in the picture.. link: thanks guys

Yes upon starting the sound comes up... when driving on fourth/fifth gear on 90+km/h the sound stops or could be the engine rev overcomes the sound but as slowing down it comes up again and upon pressing the clutch it becomes even more noticable. Upon stopping and idling, passers by just looks...

Sorry guys to sound lame, I just had a puncture and have been running on the spare wheel for the past two days till I match the brand and model of my current tyres to have them match up. Now I was in traffic for way too long, and I know it's stupid but I floored it and naturally the smaller...

DONT GO anywhere near 195/50R15 = Driving on rock-belted tyres

mate I've loved these ever since...but let me be totally honest with you.... enjoy the 'quality' in your ride before the moment you fit these in...as it'll become so bad over pot holes.. sry to say it.. But HEY it'll look damn fine! it just wouldn't feel that way. I even changed d shocks on...

Thanks to TONYSLX I've attached some brieg photo guide on accessing the dizzy.. mine's a 95reg K11 1.0L recently have been having severe etuttering and worse even kind of explosions/backfire beneath engine due to wrong firing due to distributor never checked or replaced and rotor arm in 14yrs...

MR TONYSLX is frickin INCREDIBLE - He was like my bible in such 'troubling micra moments' ! Super right indeed was his diagnosis! I'm quite aware that several users might ask similar questions, but taking time to answer might mean the world for a person like I am.. Honestly I was so upset I...

doworry chiefo! thaks still for your attention :)

How did you conclude that mate? the reason I'm focusing on the distributor is cos it's from where it appears to be emerging from the noise. And What I'm really interested in is the TIcking sound, which in reality literally the sound was similar to clicks or anything involving electric...

Just recorded this video of the engine noise :/ recently had to do the T/B fix twice again but seems to be fixed... NOW this.... car's done 60K 95'reg 1.0L k11 Hope it shows below : <embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true"...

cheers mate, why did that happen ? html code is complt... both anchor tags are there for each pic.. heh.. stil lthanks chief