Search results

Off the top of my head it was a 99 or 00 with the Si wheels, It wouldn't bolt properly because the caliper touched off the inside of the wheel, it wasn't a stock steelie just one I picked from a scrap yard for my k11 as a spare Sent from... My phone

I had problems with caliper clearance with 13" steelies on my almera 1.4, small slip on spacer probably would have remedied it Sent from... My phone

You might get lucky with alignment and have a socket extension that fits inside the splined part of the crank end, a bit of tape to bring it up to the correct diameter.It worked a treat on my jn15 vzr. Also to help line up the box i used two threaded bolts and cut the head off. Thread it into...

currently how the thread of the tires look, the channel second from the outside of the tire is worn more than the rest on both OS and NS passo wheel driver side Sent from... My phone

cheers for the reply, ill see if anywhere local can do it. There's also a crazy vibration coming through the steering wheel even though it drives straight, wheel balance? Sent from... My phone

cup Sent from... My phone

had to resort back to standard cams because i couldnt get it to run with the cga cam Okay so, since the car was lowered by the previous owner it wasn't tracked because the tire profile was too small to fit the laser guides on but always drove perfect but whilst fitting the spacers to the car i...

cooker Sent from... My phone

cold Sent from... My phone

Ed Sent from... My phone

stop the rear drums seizing while its parked up for an extended period of time Sent from... My phone

considering how hard it's been to source one i wouldnt expect it any other way at this stage to be honest lol Sent from... My phone

send your engine to ireland perhaps ? ;) Sent from... My phone

Last I seen it was getting loaded onto an AA van outside Tesco in Kettering :( Sent from... My phone

pfffft 5.30am? We left Ireland at that time to be here for about 7pm today and managed to find time to have a few drinks to wind down after Sent from... My phone

already on it in kettering, going to be a good weekend :D Sent from... My phone

Same, on the ferry now and my mate damo is telling me about all the antics the AOC crew get up to so i may be easily led astray lol Sent from... My phone

Cheers mate, I like the wheels too, they turn a lot of heads for sure Sent from... My phone

when i removed the plugs they were all soaked with petrol, the bores were hardly still flooded enough to stop it starting? or could that be a side effect of the timing still being out? It's @TDC, cams are in the right position, there are the correct number of links between each timing mark on...

This is how it sits currently Sent from... My phone