Search results

  1. TriNode

    Stainless manifold

    Is that a job for amy?
  2. TriNode

    Spoiler Glue

    I've got the original nissan lip type spoiler (not the one that goes down both sides,just the top bit), and it came with a squeezy tube of glue / sealant, a nozzle and some picture instructions on how to put the nozzle on the tube... sigh... can anyone tell me how quick that stuff dries? I'm...
  3. TriNode

    Stainless manifold

    I've been digging up old threads and they suggested that the first cat warms up quicker then the second one, so if you're just running the second and the MOT's done from cold it'll fail... Doubt I'd be bothered swapping over every year. I am suprised though that there's no kit that lets...
  4. TriNode

    Stainless manifold

    would my emmissions still be ok with one cat?
  5. TriNode

    Stainless manifold

    Is there anywhere that does a stainless performance manifold? Would the performance be noticable with a new manifold / air filter but keeping standard cat & backbox? I'm trying to keep the car fairly standard internally but eek a bit more out of it (and keep it quiet too), Plus I'd like to...
  6. TriNode

    Standard K11 Pre face lift front bumper

    Wont you miss the spotlights? I've just had to get a Super S bumper for my pre-facelift for the lights.. If you are sure you want a normal one - Bumpers are on ebay for like £30-£40...
  7. TriNode

    Got a bumper

    Thanks for the response, when you've got full beam on, is there no switch on the dash / stalk that can turn the lights off / on? Cheers
  8. TriNode

    Got a bumper

    ok thanks mike :) so Super S owners, when do the lights in your bumper come on? Are the individually switched? If so can they only be put on with main beam or dipped beam, or sidelights or anytime? Do they come on automatically? if so, with which lights? Any help would be great...
  9. TriNode

    best engine oil for a k11

    Haynes manual say's 15W/40 oil... I was going to buy some castrol gtx, but that was 10W40 then i saw some 15W40.... Castrol GTX High Mileage!! I was offended! what's the first number mean? - Anthony
  10. TriNode

    Got a bumper

    When you say with full beam, should it be on with dipped beam too? is 1997 early? I have to say I'm confised that the plug for the driving lights is there, but no space for the relay. edit: just thought, If i ran a relay on the headlight's earth line, I'd have an active circuit whenever...
  11. TriNode

    Got a bumper

    Got a bumper - with lights Got me a new (old) bumper from a Super S... Should these come on with dipped or full beam? I've got the wire behind the driver side headlight, but I'm slightly concerned, I have no relay slot for the driving lights, has anyone put one of these on a GX?
  12. TriNode

    Nice little JDM dash add on!

    no-one was going to win that auction, my bid was quite high :) Though since i found out about these JDM things through MSC, I decided it was only fair to become a paid up member in return. does the broken clip mean that vibrations / road bumps will open the latch?
  13. TriNode

    Nice little JDM dash add on!

    I'm the one that won the auction :D Wondering about the broken clip though...
  14. TriNode

    XP reinstalling automation

    Just use ghost or something to do a backup when it's all set up and activated with all the programs you need and after you've got all the latest patches installed. less than 30 mins to do, have an external usb Hard disk and backup onto that. I believe there's a bootCD which has backup...
  15. TriNode

    'Lights left on' alarm?

    is that the same switch that turns the roof / interior light on when the door opens? if so you could see if that still works, and eliminate a faulty switch as the cause.
  16. TriNode

    K11 Boot Light???

    I've got a light (97 GX) at the right hand side of the boot, I think it's set off when the boot hatch catch isn't touching the latch
  17. TriNode

    'Lights left on' alarm?

    I've got one on my '97 k11. HTH
  18. TriNode

    Need a switch.

    That's pretty cool! (the software). Sonic, can you tell me the approx size of the switch? I can make the wiring myself, I've got mirrors, I'm looking into finding the right switch. Hmm, my blanking plate is 22mm * 38mm that looks a lot more square, though it could just be the drawing...
  19. TriNode

    Need a switch.

    This is the almera switch versus my micra's blanking plate: dammit :( is there a universal switch you can get that I can just drill into the blanking plate?
  20. TriNode

    Need a switch.

    I'm trying to locate an electric mirror switch from a K11 micra. I was going to post in the buy / sell forum but I don't think I'm allowed (it say's you I can't sell, dunno about putting a wanted up, if i'm in the wrong feel free to remove this post, I won't be offended :) ), I've tried all...
Back
Top