Search results

there not alot between then,you wouldn't notice any differents

having around 40 thou skimmed off a 1.2 head will give you around 10.5 cr ma10 and ma12 use the same length and size valva's

the 1.2 head is better because it has bigger inlet ports

yes they do but the 1.2 has larger straighter inlet tracks for much better flow

I wouldn't bother using the cg13 injection setup i would use the k10 ignition setup and the distributer off an early primera 1.6 carb modal and then run the cg13 on bike carbs

has a snake got in there for the winter

does the cg10 have a 6 bolt crank if not this would be a better convertion just wondering if the cg13 clutch pressure plate could be redrilled to fit the ma flywheel

correct...the 5 speed long is the same as the 1.0 4 speed but with the extra gear.all 1.2 had the 4s long box fitted when new

If the cg1.3 flywheel fits and bolts to the ma10/12 crank then i hope this will allow you to fit the bigger clutch and gearbox

what model k10 have you got and let me no what it says 1.0 with 4 speed box will have the mark 4m or v this will have the long 3.8 diff in 1.0 with 5 speed box will have the mark 5s this will have the short 4.0 diff in all 1.2 have the long box in which is marked 4s (3.8) diff ratio The...

under the distributer on the top of the gearbox near were the clutch cable bracket is bolted to,, there on the top flat face when you clean this area up you will see a batch of 7 number close together and then a gap then a number and a letter on there own , its this last number near the letter...

i wish somebody would get on and do this gearbox change.. going on the linkcage,when i fitted the ga16 engine and box in that white k10 i cut the k10 one near the gearbox connecting nuckle then welded on the ga one come from the box back a bit and it work perfect

08 shell nearly done

i don't have a spare carb but there plenty on ebay 1,3/4 inch hiff 4 su

weld it shut like i do....lol

If anybody is thinking on fitting a weber 34 ich on there ma1.0/1.2 standard inlet manifold which is alot better performer than the standard nissan crap carb i can make a convertion plate up for £40 inc p&p

just wanted to no if you had it on yet,if you need help or a needle for the su carb doing i can suply one...just wanted to no as you are no longer a regestered user under that name on ebay...

who goes by the name of wrenchable on ebay....

slow!! until i made my 1st inlet manifold back in 99

it sound like a rattle when you excellerate in a high gear from low rev's