Search results

as said by paul smith just the throttlebodies will set you back just that. Also a 1.0 with turbo setup will get you in the region of 120-130bhp easily with around 8 psi no problem. With n/a on 1.3 you will be nearin 90-100 and thats after you've spent the £600 on N/A parts only like...

N/A is cheaper for the average micra owner with a budget of 600 will get them close to 90+ bhp with some headers,exhaus system an exhaust system + decent air feed and a cheap piggyback like safc to "tune" with but preferrably a remap. Turbo system at the very least will set you back £1500 if...

Need the wiper motor or the relay whatever it is. It looks like teh relay and the motor are one complete unit? My one stops working at the first speed but firn on the other two.

I figured as much, I think Nistune uses 2 ostrich's in combination one odd and the other even on the type 3 board. What make is your board? Do you have an e-mail or msn so I can talk to you? I would definately buy that board from you as I am looking into this now as a way of ditching my...

sorry to ressurrect this from the dead but I would be interested in finding out where i can get the daughetrboard? as wherever I have looked its been a dead end. I already have a wideband, moates ostrich 2.0 (8 bit emulator) Used for hondas. Would be interested to be able to mess around with...

lol thanks dave. Was a pleasure meeting you. I might want those gauges lol, They did look nice and well built (better then the autogauge ones at least) I'll have to see if i can pathc up the hole in my dash first lol.

I'll take these and the speedo cluster for the sr dave will pick them up asap.

I want it dave, I can come and pick it up as well. How much?

looking for a set of any lowering springs for a micra k11, doesn't matter on the drop. let me know cash waiting.

I took it off to respray my car only to discover that someone had resprayed the whole car and masked around plastics so i had two lines down the sides which were uneven. I just used a dual action sander and primered it and prepped it for paint lol. I used an eraser wheel from wurth UK took it...

khair mubarak and ramadan mubarak to everyone. You can get plug and play ktis which involve only locating the ballast with a self taper screw/bolt. others will require splicing but try and buy a plug and play kit for H4 (thats the micras i think). I am considering getting one as well sicne the...

do you mind putting a price up here total? I did call but was the parts section was closed or something. jabran.

I am looking for an aftermarket system atleast 2 inches preferrabbly from the first cat onwards but second cat will do, prefferabbly used as its gonna need some modifyign for my application. doesn't have to be janspeed but has to be free from major rust i.e has to be usable. thanks

aren't all 4 for sale as theres a full set in the pictures. Can the rears be used on standard shocks?

I want the k11 suspension setup. But i want to clarify something is it just springs for the front or the adjustable cups as well? and the rears is adjustable cups and and springs? and do the fit on without any mods? i.e like the usual procedure for changing springs? Let me know as i need...

true, how fast is a micra with a ga16? 0-60 etc compared to micra 1.3 with manifold, cams etc?

I have been to the dales and to be honest the gtr will do what its built for and use the attesa/4wd to its adavanatge and will leave you for dust. O.k i made a mistake saying any micra. Your micra with what you will do to it turbo, coilovers, full suspension kit will be no match for a gtr...

I can tell you right now no mica can outpace an r32 gtr with a remap and good suspension setup i.e coilovers will whoop any micra on any road. Drive a gtr you will see lol.

i had ga16 injecots but looking at some of the datalogs they may be maxing out. The stock maf is reading 4.45v so thats maxed out so i am going to hook up the greddy map sensor tomorrow and change the map and lower the boost until i get and sr20 fuel rail. I chased a 1.4 civic today and he...

micra turbo is 90% complete. some fine tuning is needed as its leaning after 5000rpm. i'll get a video up later. boost is addictive and i'm hooked.