Search results

What are the differences between the 2 callipers? Will a ABS calliper fit a nonABS carrier?

Fusion motorsport does a non NATS ecu, it’s what’s fitted to my sort of micra. I only have engine wiring, fuse box and relays. Everything else is cust made.

What doors???

When it was a manual I actually got it drifting round a roundabout. With a full fuel tank the front lifts a bit on max acceleration but it’s rare for a trike not to push the front end, this one sticks and corners as well as the donor car if not a bit better. at least you know what to do with...

These are a before and after photos. I bought it as a 1L manual trike, the wooden black box and a single seat. i have convert it to a 1.3L auto with a bike style seat ( no seatbelt rule) and trying to get a cleaner line to the back. the box at the back is a complete micra k11 front chassis with...

Once you have new tools you will only want more even shinier tools? think I cut out the port wires when I condensed the loom to basics, whoops.

Nice to see someone building them up still. dont have power steering on ours either, but then again it’s only got one wheel up front ?. the 1.3 goes very well, with the 15” wheels on I recko it’s going to be good for 120mph.

I ended up going for a Fusion ecu as I was cutting out so much Including the ignition switch. But the key shuffle kept it going until I swapped it out.

Heaters are for pussy’s. ????

Try a custom bike forum. There’s lots around, you just need to know where to look?

If you still have both keys and standard ignition you can reset with the keys. fit key 1 and turn on for10 seconds or so, remove and repeat with key 2 within 10 second. resets NATS and should be good to go.

Fusion are good, plug and play.

Trying again to load video

I have 14” wheels at the back running stock rear brakes. Looking for trying something larger as a trike relies on the rear brakes, it’s sports braking up front. Braking ratio is 85/90% rear 10/15% front so as you can see I could do with a bit more.

A couple of pictures of the trike, first one is loaded on the way from Sussex to Liverpool, the second one is at the point of ayre on the island. Hopefully the video loads of my wife going round the Ramsey hairpin ?

Would the larger carrier fit the car without modifications?

It’s been a while, but I had a lot to do in a short time to get the trike ready for the holiday to the Isle Of Man. Breaks, welding,moving foot controls, lights and a new engine cover. I was doing 2-3 hours an evening and most weekends 8-10 hour days. Was it worth it? BLOODY HELL YES. 275 miles...

As with the drive shafts, what’s the differences? Going to have to adapt them anyway but is there a distinct difference with threads or anything?

What’s the difference between 1L and 1.3L auto drive shafts? Need to replace one on the trike and believe the original chassis is a 1L but have a 1.3 auto engine fitted. Is it the outer splines? Think I have seen 21 and 23 spline shafts, wanting to order before disabling the trike by removing it.

Well, have done over 300 miles this weekend. A few little issues to clear up but basically she is done. My wife has been out on it today and is still grinning,