Search results

Remove the carrier, and apply some heat to it to remove the pin. Loads of rebuild kits come with the pins. be careful with the carrier, rarer than a Dodos rocking horses hens teeth.

They are out there, saw loads of front callipers when looking for the rear ones. your local parts shop might be able to help as well, more comeback and instant refund/ reorder if they get the wrong ones in.

So running a separate oil cooler similar to a motorcycle cooler might work? looking at building another trike to my own design, a separate radiator setup is looking like the easiest way of cooling.

The radiator on the autos cool the gearbox as well as the engine, is it an oil cooling system or is it water?

Lost a wheel at the front in the process ? im looking at building another trike from scratch, your 92hp from the 1.3 got me to thinking of using something I know works with a pattern for the engine bay. will it be ok to message you for more information when I get started?

A brilliant read. Shame you aren’t a bit closer, a few more horses never go amiss. think I have gone far enough with weight reduction ??, just under 500 kg now.

Thanks. As you can see from my profile picture, my micra is slightly modified ?

Is yours sensor or cable? If it’s cable and it turns out it’s the speedo I have one sat in the garage.

Was sorting out a few bits yesterday, didn’t see it. Will be doing a bit more over the next few days.

Will have a check over the next few days, might still have the bit you need. not required for my build.

I have twin disc up front with 4x30mm pistons per calliper.

looking at upgrade as these are not working as a main brake. Will try new pads as the old ones may be hard and glazed. the discs are good so trying to keep it as standard as possible but may need to rethink it. the reason I joined the site was for the wealth of knowledge about the car.

whats the D21 carrier’s off? Was this for a rear setup?

Would it matter if they were ABS ones or not?

Might even be a k10 carrier.

The front hub is the back of my vehicle. It’s a bit different.

There is only a carrier, no extra bracket. taking the pads int a motor factor on Monday, they reck they can identify them and back track to a calliper.

It’s a front hub, would the carrier be different?

Anyone got any ideas what these are off. Should be Nissan.

Thanks, thought I had ordered the wrong callipers as I didn’t see the small print of “for abs” until I pressed the buy it now button.