Search results

No, relay There are no relays in the car specifically for lights, I would recommend checking the following : Both bulbs dip beam with a meter Fuse 12 [in main fusebox] - (supply to the dim dip unit) Fuse FC [in fusible link box] - (another supply to dim dip unit) Fuse FD [in fusible...

Pins The missing wire in your loom needs to go from the ECU connector pin 2 to the new dials connector pin 2 - that's what is shown on my circuit diagrams and that's the only connection I would recommend. If you're not sure which pin it this, this might help: ECU end: Pin 1 - has Red...

Not so dim dip Thank you for your kind words. I would very much like to see your guide however when I click on the link, I get a message box saying I do not have permission to access the page - can you give me access ?

Dim dip Hi NeX, I just checked my car and you are right, the dim dip unit is not where I said it was, it is just to the left of the fuse panel behind the lower dash (I got it mixed up with the wiper delay box). There is a way to remove the dim dip unit completely, however the wiring...

Dim dip Hi guys, I've looked at the wiring diagram for the K11 with dim dip - it looks as though the answer is to disconnect the yellow wire going to pin 5 of the dim dip unit (the dim dip unit is located close to the front wiper motor on my car). If you do this, beware of: 1. This...

Circumferences Yes - here's the info: Original tyre size - 195/55/15 (thats 195mm tread width, 55% tyre height of width & 15" diameter of wheel) That makes a grand total of (((195x0.55)x2)+(15x25.4))xPi = 1870.82mm circumference. New tyre size - 195/4/15 (thats 195mm tread width...

Speed change Remember, when changing tyre profiles, your speedo will NOT account for these changes so will not show you the 'correct' speed. If the 195/55/15 tyres were the original as fitted to your car from the factory, then if you change to 195/45/15 tyres, the speedo will then under-read...

Bits wrong with mine Hi Pete, Here's a list of things that was wrong with mine when I acquired it - not necessarily the 'usual' things, but could be useful in negotiating a discount: Head gasket - water in the oil, oil in the water.... Rear box rotted out - at weld near offside rear...

Hi All, New member - just 'acquired' K11 pre-facelift 1.3GX - fixed a blown head gasket and made roadworthy, now looking to add a few 'niceties' to make it more user friendly. Cheers Graeme

Oh Relay ? Hi GTtdiRCT, Swap out the "Ignition Relay" located in the passenger fusebox - it seems to account for all the symptoms apart from the heated rear window. Hope this helps Cheers Graeme