Search results

.... but only if you can collect from Woolwich area of London..... http://www.ebay.co.uk/itm/291526426089?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Can anyone assist ? I need the two 'clips' that are bonded to the bottom of my driver's front window glass - I just called Nissan - they say these clips are no longer available to buy separately - you have to buy the glass too ! They look like this ...

I pulled off the front sticker and found there are only 2 bulbs in the heater unit - both OK. I fitted aluminium foil around the inside of the unit to get better reflection of the light so that it is visible in the dark !

Thanks again infinity - I'll check out R reg.

Thanks infinity - I guessed it was going to be something like that - I couldn't see any way for the bulbs to be accessible from the back.

Does anyone here know how to change the illumination bulbs in the heater unit of a later 1998 1.0 GX? Cheers Graeme

Hi all, My first Micra (1.3 GX) finally died and had to go and 'live on a farm'. I have now acquired a 1.0GX which I am getting roadworthy to teach my 2nd daughter to drive - it is a late 1998 model with the later style headlights. On inspection, I will be needing the following parts : 1...

I move the contact disc. I don't like the idea of drilling another hole to reposition the crank pin as the material left on the wheel is too small and I think the pin will work loose and eventually damage the nylon wheel. Are you looking for one now ? - I have one 'spare'...

I've seen the guides - one that moves the actuator pin and another that moves the contact disc. They are well written and easy to follow, however if anyone doesn't fancy doing it / hasn't got the time / just wants a swap out job, then I can help. Cheers Graeme

Hi Karlj, Thanks for the rapid reply - I have investigated the spring assiters route - they do look very flimsy and not very permanent, however in the lack of any other option, that is what I might have to go for. Anyone added a 2nd spring to the swing arm ? Cheers Graeme

Dear all, I've been messing about with my original 1996 K11 rear wiper motor/gearbox assy and managed to get the wiper arm to reliably, automatically park in the horizontal position. I have perfected the modification and I would like to know if anyone wants to have a replacement...

Hi all, I have an early 1997 1.3 GX 5 door which, rather hilariously, has a tow bar. The rear springs are rather saggy - does anyone out there know where I can get uprated/stiffer rear springs which do not lower the ride height ? Front springs/struts are OK. Cheers Graeme

Flaps How much are you after for the mudflaps ? Cheers Graeme

H4 Yes - That will fit directly on the back of the bulb replacing the existing connector.

Skyline for me Skyline every time, however I would say that because I have one - 1997 ECR33 2.5 Turbo - 280bhp (dyno) - jolly good fun in this weather.... Skyline owners club are very accomodating - if you want to know about mine, PM me.

Cooked connector Try an Ebay search using the keywords 'H4' and 'connector' - this pulled up a number of options. Good luck

Unlucky 7 Air - check: 1. air filter blocked 2. air intake blocked Fuel - check: 1. fuel pump is running when the engine is running 2. fuel filter is not blocked Spark - check: 1. there is HT getting to the distributor 2. is there an aftermarket alarm on the car stopping the...

WANTED: Rev counter, speedo (mechanical type) and temp/fuel gauge binnacle/dash to fit my 1996 1.3GX. Anything considered Cheers Graeme

Left hooker Looks to me as though the Depo lights have been setup for left hand drive - they certainly won't pass an MOT in this country like that. Talk to the suppliers as soon as possible, ideally before the statutary 14 days 'cooling off' period.

Dim dip unit All of the symptoms you write about might be caused by the dim dip unit - try removing/disabling it as discussed later on in the below link : http://www.micra.org.uk/showthread.php?t=26405 Cheers Graeme