Search results

Hi Agent_Sm1th Thank you for the procedure - I was using this and found the following : 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. - I did this. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. - I did this. 3. After 2 seconds...

Apologies for the strikethroughs in my last post - this has happened to me before and I don't know how or why it is happening.

Hi Infinity, Thanks for getting back to me - what year is your K11 ? Since my last post on this thread I tried the 'adding new fob' procedure and my car didn't respond in the expected way... see here -> https://www.micra.org.uk/threads/central-locking-adding-a-remote-fob.66055/unread

I have a 1998 facelift 1.0 GX with central locking operating from both front door key locks. I would like to have remote controlled locking - I did a search in this database and pulled up this thread: https://www.micra.org.uk/posts/523965/ I tried the turning the ignition on and off 6 times...

I mean the key/fob/control that is used to remotely lock/unlock the doors.

OK - anyone out there with a late 1998 GX willing to share pictures of your remote controls ?

Yes - that should work. I suggest fitting an in-line fuse between the joined red/yellow / red/blue and the sidelight supply of ~1A [assuming you are still using leds] to protect the sidelight circuit.

My recently acquired late 1998 K11 facelift 1.0 GX came only with one non-standard key [Silca] with a red chip and no remote function. My car seems to have an 'alarm' box [see attached photo] with what looks like aerials [wire] coming from it - I assume these are for remote operation. Is the...

NB the negative side of your led needs to connect to the chassis (0v)

The 2 black wires connect to chassis (0v), the red/blue wire connects to dash illumination, the red/yellow wire connects to a +12v supply and the 2 brown wires connect to the device you want to power.

I've just looked at this again and I think it might not necessarily be the wiper motor/gearbox assembly, it could be the front wiper relay and/or the switch. Do the wipers stop not in the parked position if you have them on either 1 or 2 position, then turn them off as they start the next wipe ?

It is most likely to be the wiper motor/gearbox unit - it has it's own +12v feed which goes to an electrical contact [also named 'wiper'] on the mechanism which returns the wiper arms to the 'park' position when the wipers have been turned 'off' - i.e. during INT, the wiper ON signal goes to the...

Can you be more specific about the problem you're having : front or rear wipers what setting are using when the 'stalling' happens - int, 1 or 2 how do you get the wipers to start working again ?

The rear speaker connector in the car loom is a 4 pin 'square' type like this : There are 4 wires, 2 for each speaker [coming from the head unit] like this : ..and when the parcel shelf is plugged in, it looks like this :

Another thought - have a look at all of the 'unused' telltales in your cluster - it is possible that there are more than one version of cluster without rev counter that has a front fog telltale. My last Micra (1997) had the mechanical speedo [which I upgraded to rev counter] and I know there...

My original cluster which had speedo, fuel and temperature gauges does not have the front fog light telltale. The cluster which has speedo, rev counter fuel and temperature gauges has the front fog telltale which comes out on the multi-connector on pin3. You can see part of the cluster in this...

I had the same issue - see my post : https://www.micra.org.uk/threads/phase1-facelift-speedo-cluster-and-front-fogs-upgrade-irritation.65045/#post-727947

Hi Infinity, Thanks for the response - non facelifts definitely cannot do this without serious messing, however it is likely that a phase 2 facelift could do it - try looking at the current wiper switch, the contacts, the labels and the stamped part number of the wiper stalk switch assembly. If...

Do you have a wiper stalk that looks like this ? Would you like a wiper stalk that does this ? ...or even one that does this ? Well, if you have a facelift model, then you can, relatively easily - here's how : FYI - I did this on my 1998 [Sept] 1.0 GX phase 1 facelift. 1. Check the...

My 1998 phase 1 facelift cigarette lighter is unpowered when the key is out of the ignition, but is on when the key is in the ACC and IGN positions. It is OFF when starting the engine. You could power the tacho from this source if yours is switched, however it would be better if you used an IGN...