Search results

  1. C

    SYDNEY MEET ANYONE???

    JDMST meet at rocklea?
  2. C

    EOI/FS K11 in Brisbane

    Pm sent
  3. C

    Panhard Rod ?

    Try gsl rallysport They were cheap
  4. C

    nismo grille

    Removed the badge and cut in following the line of the grill then i sanded the plastic off rough edges smooth/flush then taped and cleaned. then i filed/sanded the excess filler off and sprayed it with a coat of primer filler, then sanded smooth and then another coat. but i do not...
  5. C

    nismo grille

    I am in the process of modding a grill. It is pretty easy, i used a jab saw (for plaster board), and a bastard file to cut te centre out then just masking taped the void left and filled it with fibre reinforced filler. Currently in the process of sanding and filling all the dings that were...
  6. C

    nismo grille

    https://micra.org.uk/cmf/message/73368 https://micra.org.uk/cmf/message/58626
  7. C

    Oil filter change

    I Tighten it to hand tight then back it off a tiny bit. It is designed to seal itself to the engine once it heats up.
  8. C

    Oil filter change

    If you take the airbox off/ have a pod filter then there is enough space
  9. C

    Oil filter change

    I have done it from the top by hand which was a little awkward Another time was from the bottom with a screw driver when who ever serviced it before me had over tightened it and i couldn't undo it by hand (very messy haha).
  10. C

    GA16DE In To A K11 ???

    Yeah a sr20 rwd would be awesome
  11. C

    Suspension squeaking noise

    There is always the option commonly perscribed by mechanics: Turn your radio up. Could also be worn suspension bushes
  12. C

    Free iPads - or some cruising

    I could be keen depending on when/where
  13. C

    Correct oil

    I have 10-40W in mine and its sitting at 280k
  14. C

    Rim widths

    I have 15x7+0 on mine with no mods yet the rears are fine But i will need to roll the fronts out a bit, as there is a bit of poke. Fat Fitment in brisbane is a guard roller who come to you. Or you can do it yourself with a hairdryer/heat gun and a rubber mallet
  15. C

    Wire new head unit but headlight fuse keeps blowing

    The old wirelesses were backlit when the headlights/parkers were turned on. (like te hazards and rear demister switches do) Its either a connection with that illumintion wire earthing out. Or as frank said you just need to run a new earth. Any part of the metal frame that the cd player...
  16. C

    [QLD] Feb 2012 Downshift x JDM x Euro OPEN MEET & GYMKHANA

    How was it guys? Sorry i didnt come had family come round to see my new place. there are a few pics here: http://www.freeworks.com.au/blog/
  17. C

    [QLD] Feb 2012 Downshift x JDM x Euro OPEN MEET & GYMKHANA

    I will be at QR early ish 4pm for an hour or two
  18. C

    [QLD] Feb 2012 Downshift x JDM x Euro OPEN MEET & GYMKHANA

    Nah I will probably just go to the meet early if I do anything...
  19. C

    [QLD] Feb 2012 Downshift x JDM x Euro OPEN MEET & GYMKHANA

    same see u there
  20. C

    steering wheel + gear shift knob

    Pulling them off and using spray and wipe and metho, shoukd clean it up good Or anything off a nissan will work for a gearknob
Back
Top