Search results

Well i need a new bonnet. Wings and headlights grr.. Sent from my SM-G920F using Tapatalk

Were having a girl Sent from my SM-G920F using Tapatalk

Oh yes it is. Got some tools and a sheet of 1.2mm steel... gonna reinforce the wobbly bits in the bay. They might not look 100%. But theyre not going to deteriorate any further. Got a set square. Steel rule. Xmas tree drill. Drill bits. Multimeter. Sharpie. Flap wheel for the angle grinder...

Need to take the angle grinder to the steering column. To remove the lock barrel and the three welded tabs that hold the stalks on. Sent from my SM-G920F using Tapatalk

Loom is in. Just the ecu loom to go and then connect and test. Sent from my SM-G920F using Tapatalk

Crack Warp Ripple... Sent from my SM-G920F using Tapatalk

Oh the joys.. Could getrid of some of the multiple feed wires onto a bus bar... Sent from my SM-G920F using Tapatalk

Braid? No.. lay them out flat and make sure none of them cross. No sharp turns of any radius of 1"(or less) transitions and junctions tied off with lacing cord and stress releaved. All curcuits labled and colour coded then correctly routed and p-clipped appropriately so as to not rub or cause...

I cant believe how untidy the stock loom is.. Never heard of wiring husbandry obviously.. Sent from my SM-G920F using Tapatalk

Should be the last but cut out. Ish Sent from my SM-G920F using Tapatalk

So for the rear of the car i will only need rear lights that include side, brake, indicator/hazzard, number plate, reverse and fog light wiring and the fuel pump. Everything else beyond the dashboard is scrap. The front will require, Brake light switch. Headlights and relay for high/low...

Its a case of laying out the loom as it was in the car and going through wiring colours in the haynes. Cutting off the connectors you dont need like abs. Central locking. Speakers. Electric windows. Alarm. Etc and tracing them back through the loom..removing everything they connect to.... relays...

waste crap so far. getting there....ish... help.. lol. Sent from my SM-G920F using Tapatalk

Ive found crank angle sensor. Rear lights and fuel pump so far aargh.. . Sent from my SM-G920F using Tapatalk

Nats loom in the micra. Non nats in the mera.... Sent from my SM-G920F using Tapatalk

That is the whole loom.... ive just got to thin it out. Lol Sent from my SM-G920F using Tapatalk

Loom is out of the primera. Man its about 400 times more complicated than the micra one. This is going to be a mission just to sort out where everything goes. Theres abs wires. Central locking. Aircon. Power steering. Leccy mirrors and windows. Fog lights. Electric adjust headlights. All the...

Oops meant to say im cutting off the plugs of everything i dont need and will strip the loom back once its out Sent from my SM-G920F using Tapatalk

90% of loom pulled from primera. Bloody thing... had an aftermarket alarm bodged into every orifice.. traced them back and cut them off at the source. Every plug im not going to use such as leccy windas and mirrors. Central locking and stereo crap. Was a big job. Also took out the airbox and...

The git is oot. Sent from my SM-G920F using Tapatalk