You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2025-06-26 Inspect Fuel Tank for Debris
So I swapped to a clean facelift tank since March 2024
Changed to a stainless filler pipe in...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Attached brakes & aligned the wheels
Printed this cover to protect the exposed adjustable trailing arms from rust
Going for a...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2025-06-24 Install New Rear Axle
Had to trim the inside lip off these spring cusions so that the spring doesn't jam on the spring seat...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Axle overhauled & ready to reinstall :cool: 👌
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
Wirebrushed & cleaned the light surface rust off all the parts
Applied the initial layer of Jomastic epoxy primer followed by a...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2025-06-21 Make Rose Jointed Panhard Rod
Welded the nuts onto the new steel pipe
Attached the rose joints
Machined this tapered...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2025-06-21 Weld New Panhard Rod Mount
I was waiting on this ebay M16 bolt for the panhard mount but realised it's coming from china &...
-
Seb_ reacted to
pollyp's post in the thread
PollyMobiles Rebuild with
Like.
2025-06-19 Wirebrush Rear Axle
Managed to pry the RH spring off & snapped the rest of the panhard mount off 🙈
Wirebrushed as much...
