Seb_'s latest activity
-
Seb_ replied to the thread PollyMobiles Rebuild.Thank you for fact checking that japanese people were right about extra enhanced grounding kits! I always wondered if they were really... -
2025-09-13 Datalog After Removing Weight The gearstick had a slight buzz during high rpm so I trimmed the inner bearing bushing to...
-
2025-09-08 Dolly & Hammer Kit Brought a cheap 7pc dolly & hammer kit off ebay to learn how to fix these spare dented front wings I...
-
2025-09-06 Replace Ground Straps to Fix Electrical Issues For the past few years I've often thought the electrical systems were getting...
-
2025-09-06 Print Stronger HT Lead Clips The previous thin lead clips were getting loose with the heat 🫣 Designed a thicker &...
-
Thanks for your support Micra Paul :) Always something new to learn when you're curious enough :unsure:😁 yup cheepaschips ftw (y)
-
2025-09-03 New Fake Makita 9Ah Battery Ordered a new 9ah 162W/h battery off ebay and hmm it's abit smaller than my old 9ah one? either...
-
These Denso K16TT are just regular cheap nickel coated electrodes with a thinner double-pertruding tip design (smaller area might've...
-
Ah I should've checked with the nissan4u OEM charts first which shows the factory spark plugs are indeed NGK BKR4E-11 / BKR5E-11 /...
-
2025-09-02 Test Headunit Max Volume vs Frequency To test how the equaliser setting & input voltage affects the max vol level just...
-
2025-09-01 Check Brake Wear Discs are wearing smooth & evenly All the pads wearing evenly, front inner pad has a slight lip Front...
-
The "switched 12v feed" for the headunit, which has to run through the IGN switch & immobiliser & extra crimps, seems to get only 13.67v...
-
2025-08-31 Test Sony Headunit RMS Voltages Since the last time I tested the Sony headunits speaker output in June 2020, I've improved...
-
2025-08-31 Replace Fuel Hose I was watching this video about E10 and poor quality modern cheap fuel hoses degrading/cracking, reminding...
-
2025-08-29 Print HT Lead Clips These HT lead supports I printed 10yrs ago are starting to warp & crack from all the heat & clamping...
