andy's latest activity

  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-10-05 Clean Rear Brake Discs The inner sides of brake discs on both micra & peugeot always tend to rust with a rough finish...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-10-06 Remove Peugeot Bumper & Headlight to Clean Earth Points Removing all the seized fasteners & snapped plastic clips on the old...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-10-07 Exhaust Sound Analysis My last sound analysis in Dec 2024 featured the new 4-1 manifold with fake primary cat, a straight...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-10-07 Check Valve Gap & Compression Checked the gaps while engine is still warm 6mth oil changes with Castrol GTX ultraclean...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-10-10 Clean Headlight Connectors The earthing points at the sides were abit rusty Gave it a quick wirebrush & paint...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    Another wiring to fix is the old red LED brake light strip which I soldered and has gone hard & resistive :rolleyes: So I replace em...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    The "switched 12v feed" for the headunit, which has to run through the IGN switch & immobiliser & extra crimps, seems to get only 13.67v...
  • A
    andy replied to the thread Any k11's for sale?.
    the post is from 2017, hope they have one by now :ROFLMAO:
  • A
    andy reacted to Micra Paul's post in the thread PollyMobiles Rebuild with Like Like.
    Cheap as chips motoring suits me as I drive on into my motoring Sunset with many more K11 years to keep it going. I keep it seriously...
  • A
    andy replied to the thread a.
    mods or admin have to remove threads (y)
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    Thanks for your support Micra Paul :) Always something new to learn when you're curious enough :unsure:😁 yup cheepaschips ftw (y)
  • A
    andy reacted to Micra Paul's post in the thread PollyMobiles Rebuild with Like Like.
    Appreciate you’re above & beyond analysis interpretation of plugs set ups as I never thought to cut them open only looking at the tips...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-04 Check Peugeot 307 Plugs I haven't checked the old peugeots plugs in awhile :unsure: Haynes says it should be Bosch FR7ME...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-03 Inspect Spark Plug History I chopped open the Denso plugs to inspect the insulator which seems to be in the correct heat...
  • A
    andy reacted to pollyp's post in the thread PollyMobiles Rebuild with Like Like.
    2025-09-03 New Fake Makita 9Ah Battery Ordered a new 9ah 162W/h battery off ebay and hmm it's abit smaller than my old 9ah one? either...
Show older items
Back
Top